John Deere 1010
The John Deere 1010 is a utility tractor produced by John Deere, primarily manufactured in Dubuque, Iowa, from 1960 to 1965. A total of 44,377 units were built across various models, including the Row Crop (R), Utility (U), and Orchard (O) versions. The tractor was designed to cater to diverse agricultural needs, offering configurations tailored for different farming tasks.
The John Deere 1010 is powered by either a 2.4L four-cylinder diesel engine or a 1.9L four-cylinder gasoline engine. The diesel variant has a displacement of 144.5 cubic inches and a compression ratio of 18:1, while the gasoline engine has a displacement of 115.5 cubic inches with a lower compression ratio of 8.3:1. Both engines are liquid-cooled and rated for operation at 2500 RPM.
In terms of performance, the John Deere 1010 delivers approximately 30 horsepower at the drawbar and about 36 horsepower at the power take-off (PTO). The tractor features a five-speed sliding gear transmission, allowing for efficient power management during various agricultural operations. It has a fuel capacity of 12 gallons and a hydraulic system capacity of 4.5 gallons.
The design includes an open operator station with manual steering as standard, though power steering was available as an option. The mechanical disc brakes enhance safety and control during operation. Weighing between 3,350 to 4,041 pounds depending on the model and configuration, the tractor is equipped with rear tires measuring 10-34 inches and front tires sized at 5.00-15 inches.
Overall, the John Deere 1010 is recognized for its versatility and reliability in agricultural applications, making it a valuable asset for farmers during its production years.
John Deere 1010 Specs
Engine Options
- 2.4L 4-cylinder diesel engine
- 1.9L 4-cylinder gasoline engine
- 2.4L 4-Cylinder Diesel Engine
- Displacement: 144.5 cubic inches (ci)
- Bore/Stroke: 3.625 x 3.50 inches
- Compression Ratio: 18:1
- Rated RPM: 2500
- Liquid-cooled system
- 1.9L 4-Cylinder Gasoline Engine
- Displacement: 115.5 cubic inches (ci)
- Bore/Stroke: 3.50 x 3.00 inches
- Compression Ratio: 8.3:1
- Rated RPM: 2500
- Liquid-cooled system
Both engines are designed for durability and efficiency, providing reliable performance for various farming tasks. The diesel engine is particularly noted for its higher compression ratio and power output, making it suitable for heavier workloads, while the gasoline engine offers a more straightforward operation for lighter tasks.
Power
- Drawbar Power: 30 hp (22.4 kW)
- PTO Power: 36.13 hp (26.9 kW)
Transmission
- 5-speed sliding gear transmission
The John Deere 1010 features a 5-speed sliding gear transmission designed for effective power management in agricultural tasks. Here are the key specifications:
- Transmission Type: Sliding gear
- Number of Gears: 5 forward and 1 reverse
- Clutch Type: Dry disc clutch
- Maximum Forward Speed: Approximately 16.9 mph (27.1 km/h)
- Maximum Reverse Speed: Approximately 2.6 mph (4.2 km/h)
The shift lever for the transmission was initially located on the dash, but starting from the 1963 model year, it was relocated to the top of the transmission for improved accessibility. This configuration allows operators to efficiently navigate various terrains while providing reliable performance across different farming applications.
Dimensions and Weight
- Wheelbase: 82.5 inches (209 cm)
- Weight: 3,350 to 4,041 pounds
Tires
- Front Tires: 5.00-15
- Rear Tires: 10-34
The John Deere 1010 is equipped with specific tire sizes that enhance its performance in agricultural applications:Front Tires
- Standard: 5.00-15
- Optional: 6.00-16
Rear Tires
- Standard: 10-34
- Optional: 12.4-28 or 13.6-28
These tire sizes are designed to provide optimal traction and stability on various terrains, making the John Deere 1010 a versatile choice for different farming tasks.
The front tires are smaller, allowing for better maneuverability, while the larger rear tires support heavier loads and improve overall traction during operation.
Capacities
- Fuel Tank: 12 gallons (45.4 liters)
- Hydraulic System: 4.5 gallons (17 liters)
Hydraulics
- Open-center hydraulic system
The hydraulic system of the John Deere 1010 is designed for efficiency and versatility in agricultural applications. Here are the key specifications:
- Hydraulic System Type: Open center
- Implement Pump Type: Gear pump
- Hydraulic Capacity: 4.5 gallons (17.0 liters)
- 3-Point Hitch Category: Category 1
The open-center hydraulic system allows for continuous flow of hydraulic fluid, enabling multiple implements to be operated simultaneously.
The gear pump provides reliable performance, ensuring adequate hydraulic pressure to power various attachments and implements used in farming tasks.
The Category 1 hitch compatibility facilitates easy connection with a wide range of implements, enhancing the tractor’s utility and adaptability on the farm.
This hydraulic setup contributes significantly to the overall functionality of the John Deere 1010, making it a valuable asset for farmers.
PTO and Hitch
- Rear PTO: Transmission-driven, with optional independent PTO (540 or 540/1000 RPM)
- Rear Hitch: Category I
Brakes and Steering
- Brakes: Mechanical disc brakes
- Steering: Manual, with optional power steering
Operator Station
- Open operator station design
This utility tractor was produced between 1960 and 1965 and offered versatility for various agricultural tasks.
John Deere 1010 Prices
Current Prices for John Deere 1010 Tractors
As of February 3, 2025, the prices for used John Deere 1010 tractors vary based on model, condition, and features. Here are some typical price ranges:
- John Deere 1010C: Approximately $5,392.79
- John Deere 1010RC: Around $6,500.00
- John Deere 1010RCS: Estimated at $7,000.00
- John Deere 1010RS: About $5,771.43
Additionally, specific models have been listed for sale at various prices:
- A 1963 John Deere 1010 has been priced at $9,500 for a gear drive version with 2WD.
- Another 1963 John Deere 1010 is available for $4,950, also in 2WD with a power output of 40 HP.
- In Canada, a similar model is listed for around CAD $13,754.
Prices can fluctuate based on factors such as location, tractor condition, and any additional features or attachments included with the sale. Buyers should consider these variables when evaluating the market for the John Deere 1010.
John Deere 1010 Where to Buy
If you’re looking to purchase a John Deere 1010 tractor, there are several platforms and resources available:
- Machinery Pete
This site features a variety of used John Deere 1010 tractors for sale. You can browse listings from different sellers and compare prices. - TractorHouse
A comprehensive marketplace where you can find both new and used John Deere 1010 tractors. The site allows you to filter by location, price, and condition. - Agriaffaires
This platform specializes in agricultural equipment and offers listings for used John Deere 1010 tractors from private sellers and dealers, particularly in the UK. - AgDealer
A resource for finding John Deere 1010 tractors across Canada and the USA. The site aggregates listings from various dealers, making it easier to find options near you. - Fastline
Another effective marketplace for browsing new and used tractors, including the John Deere 1010. Fastline features a wide range of agricultural equipment listings.
When considering a purchase, it’s advisable to check multiple sources to compare prices and conditions, ensuring you find the best option that meets your needs.
John Deere 1010 Parts
John Deere 1010 Parts Availability
If you’re looking for parts for the John Deere 1010 tractor, several options are available to help you find what you need:
- Online Retailers
Various online retailers specialize in tractor parts. Websites like Steiner Tractor Parts and Yesterday’s Tractors offer a wide range of components including engine parts, electrical systems, and body panels. They often have detailed catalogs to help you locate specific parts. - Agricultural Equipment Suppliers
Many agricultural equipment suppliers provide parts for older models like the John Deere 1010. Companies such as All States Ag Parts and Sloan Express have extensive inventories of both new and used parts. - Local Dealerships
Local John Deere dealerships may have access to parts or can order them for you. This option is beneficial as they can provide expert advice on compatibility and installation. - Salvage Yards
Salvage yards that specialize in agricultural machinery can be a valuable resource for hard-to-find parts. They often have used components at lower prices, which can be ideal for older tractors. - Online Marketplaces
Platforms like eBay or Craigslist may have listings from private sellers offering new, used, or refurbished parts for the John Deere 1010. This can be a good way to find specific items that may not be available through traditional retailers.
By exploring these avenues, you should be able to find the necessary parts to maintain or restore your John Deere 1010 tractor effectively.
John Deere 1010 Parts List
- Arm Rest Seat Cushion Set
- Steering Pin
- Premium Carburetor Repair Kit
- 12-Volt One Wire Alternator
- Grille Screen
- Radiator Cap (AA5757R)
- Throttle Knob
- Final Drive Gasket (T12914)
- Point Set (WICO)
- Ignition Tune-Up Kit (Prestolite)
- Electronic Ignition Kit (12V negative ground system)
- 12 x 28 Blank Rear Rim
- Deluxe Tractor Seat Pad
- Clam Shell Fender
- Throttle Body Repair Bushing
- Restoration Quality Muffler with clamp
- Gas Manifold with 13″ exhaust pipe
- Restoration Quality Wiring Harness
- Standard Connecting Rod Bearing
- Fuel Line Adapter Fitting (1/8″ NPT male to 5/16″ compression fitting)
- Pushrod (AT14308)
- Temperature Gauge
This list includes essential components and accessories for maintaining and restoring the John Deere 1010 tractor, catering to various needs from engine repairs to comfort enhancements for the operator’s seat.
John Deere 1010 Backhoe
The John Deere 1010 backhoe, particularly the 1010W model, is a versatile piece of equipment designed for various construction and excavation tasks. Here are some key details:
Specifications
- Operating Length: Approximately 12 ft 8 in (varies with configuration)
- Weight: The 1010 loader with backhoe typically weighs between 12,000 to 13,000 lbs, depending on attachments and configurations.
- Hydraulic System: Open center hydraulic system, allowing for efficient operation of the backhoe and other attachments.
Features
- Backhoe Attachment: The backhoe can be equipped with different bucket sizes, commonly ranging from 12 inches to 24 inches, allowing for versatility in digging and trenching tasks.
- Loader Compatibility: The backhoe is designed to work seamlessly with the loader component of the 1010W, providing enhanced functionality for lifting and moving materials.
- Control System: Typically features dual-lever controls for precise operation of the backhoe functions, including boom lift, swing, and bucket curl.
Applications
The John Deere 1010 backhoe is suitable for a range of applications including:
- Excavation for foundations or utility lines
- Landscaping and grading
- Material handling and loading
- Road maintenance and repair
This combination of specifications and features makes the John Deere 1010 backhoe a valuable tool for both agricultural and construction tasks, providing efficiency and reliability on the job site.
John Deere 1010 Weight
The weight of the John Deere 1010 varies based on the engine type and configuration:
- Shipping Weight:
- Gasoline Model: 3,350 lbs (1,519 kg)
- Diesel Model: 3,430 lbs (1,555 kg)
- Operating Weight:
- Gasoline Model: 3,920 lbs (1,779 kg)
- Diesel Model: 4,040 lbs (1,832 kg)
- Ballasted Weight:
- Approximately 5,750 lbs (2,608 kg)
These weight specifications indicate the tractor’s robust build, suitable for a variety of agricultural tasks while ensuring stability and performance in the field.
John Deere 1010 Horsepower
The John Deere 1010 tractor is equipped with both gasoline and diesel engine options, each providing reliable horsepower for various agricultural tasks.
- Gasoline Engine
- Rated Power: 40.0 horsepower (29.6 kW) at 2500 RPM
- Drawbar Horsepower: Approximately 30 horsepower
- Diesel Engine
- Rated Power: 40.0 horsepower (29.6 kW) at 2500 RPM
- Drawbar Horsepower: Approximately 30 horsepower
Both engine variants deliver consistent performance, making the John Deere 1010 a versatile choice for farmers needing dependable power for their operations. The tractor’s power take-off (PTO) also provides about 36.2 horsepower, enhancing its capability to operate various implements efficiently.
John Deere 1010 Loader
The John Deere 1010 loader, specifically the 1010W model, is designed for various agricultural and construction applications. It offers a combination of power and versatility, making it suitable for tasks such as material handling, loading, and excavation.
Specifications
- Operating Weight: Approximately 12,000 to 13,000 lbs (varies with attachments)
- Loader Type: Front-end loader compatible with the John Deere 1010 tractor
- Lift Capacity: Typically around 1,000 to 1,500 lbs, depending on the bucket size and configuration
- Bucket Options: Available with various bucket sizes, commonly ranging from 60 inches to 84 inches
Features
- Hydraulic System: Open center hydraulic system that allows for efficient operation of the loader functions.
- Control System: Dual-lever controls for precise operation of lifting and lowering the loader bucket.
- Attachment Compatibility: Can be equipped with different attachments such as forks, brooms, and snow blades to enhance functionality.
Applications
The John Deere 1010 loader is ideal for a range of tasks including:
- Loading and unloading materials
- Grading and leveling surfaces
- Digging and trenching operations
- Snow removal
Overall, the John Deere 1010 loader is a reliable tool that enhances the productivity of the John Deere 1010 tractor in various agricultural and construction settings.
John Deere 1010 Problems
The John Deere 1010 tractor has been noted for several issues that users have experienced over the years. Here are some of the most frequently reported problems:
- Engine Design Flaws
Many users have criticized the engine design, particularly in diesel models, which are known to have starting difficulties and issues such as cracked cylinder heads. One of the primary complaints regarding the John Deere 1010 is related to its engine configuration. The design utilizes a one-piece sleeve and deck setup, which many users consider problematic. This design can lead to difficulties in maintenance and repairs, as there are limited options for oversized pistons, making it challenging to address wear and tear effectively. - Hydraulic System Issues
The hydraulic pump setup is often described as odd, leading to inefficiencies. Users have reported problems with hydraulic performance, including slow operation and leaks. While not directly an engine issue, the hydraulic pump setup has been described as unconventional, leading to a lack of efficiency that can compound problems related to engine performance. - Steering Problems
The steering mechanism has been flagged as a weak point, with users experiencing issues related to the design of the steering gear. The use of two pins operated by a worm gear can lead to failures, and replacement parts are often hard to find. - Braking System Concerns
Complaints about the braking system include poor performance and reliability, which can pose safety risks during operation. - Starting Difficulties
Some users have encountered starting issues, particularly in colder weather or after prolonged periods of inactivity. This includes problems with fuel delivery and carburetor performance. Users have reported that the diesel engine, in particular, can experience starting issues, especially in colder conditions. Problems such as stalling and difficulty in ignition have been noted, often attributed to fuel delivery issues or complications within the engine’s internal components. - Power Loss on Inclines
Reports indicate that the tractor may lose power when going uphill, even after extensive repairs to various components such as the ignition system and fuel lines.
These problems highlight the importance of thorough maintenance and awareness of potential issues when operating or purchasing a John Deere 1010 tractor.
FAQ
1. What are the common problems with the John Deere 1010?
Common problems include engine design flaws, hydraulic system issues, steering problems, and starting difficulties.
2. What is the horsepower of the John Deere 1010?
The John Deere 1010 typically offers around 40 horsepower for both gasoline and diesel models.
3. What are the weight specifications for the John Deere 1010?
The shipping weight ranges from approximately 3,350 lbs for the gasoline model to about 3,430 lbs for the diesel model.
4. What types of engines are available in the John Deere 1010?
The John Deere 1010 is available with a 2.4L diesel engine or a 1.9L gasoline engine.
5. What is the hydraulic capacity of the John Deere 1010?
The hydraulic system capacity is approximately 4.5 gallons.
6. Where can I buy parts for the John Deere 1010?
Parts can be purchased through various online retailers, tractor supply stores, and specialized agricultural equipment suppliers.
7. What attachments are compatible with the John Deere 1010?
The John Deere 1010 is compatible with various attachments including loaders, backhoes, and different implements for farming tasks.
8. How do I troubleshoot starting issues with my John Deere 1010?
Troubleshooting may involve checking the battery, fuel delivery system, ignition components, and ensuring proper maintenance of the engine.
9. What is the typical fuel capacity of the John Deere 1010?
The fuel tank capacity is approximately 12 gallons.
10. Can I find a user manual for the John Deere 1010?
User manuals can typically be found online through various tractor forums, manufacturer websites, or by contacting a local John Deere dealer.