Kubota SVL Series Compact Track Loaders: Maintenance, Parts and Repair Guide
Kubota SVL Series compact track loader maintenance combines engine servicing, hydraulic-system care, undercarriage inspection and regular checks of the loader linkage and attachment coupler. Keeping the tracks, rollers, cooling equipment and safety controls in good condition is just as important as replacing oil and filters.
And See:
- Kubota Construction Equipment Maintenance, Parts & Repair
- Kubota Excavator, Skid Steer and Track Loader Serial Number Lokup
This guide covers verified current and legacy Kubota SVL models, routine servicing, replacement parts and general troubleshooting. It explains how to approach starting problems, weak hydraulics, travel faults, overheating, track derailment, attachment issues and emissions warnings before moving to machine-specific repair instructions.
The SVL range spans several generations. Exact service intervals, fluid specifications, track-tension measurements, torque settings and diagnostic values must come from the documentation for the machine’s model, serial number and configuration.
Kubota SVL Models: Current and Legacy Directory
The verified principal SVL model directory covered by this guide consists of:
-
Kubota SVL65-2.
-
Kubota SVL65-2s.
-
Kubota SVL75.
-
Kubota SVL75-2.
-
Kubota SVL75-3.
-
Kubota SVL90.
-
Kubota SVL90-2.
-
Kubota SVL95-2s.
-
Kubota SVL97-2.
-
Kubota SVL97-3.
-
Kubota SVL110-3.
These designations are documented across Kubota’s product information, brochures and OEM parts resources. Capitalisation varies: “SVL65-2s” may appear as “SVL65-2S,” and “SVL95-2s” as “SVL95-2S.” Those spelling differences do not establish separate machines.kubotausa+4
This is the verified principal-model list, not a guarantee that every regional configuration code or catalogue revision is included. New-machine availability varies by market and dealer stock.
Current-Range and Recent Models
Kubota’s newer North American product information lists:
-
SVL65-2.
-
SVL65-2s.
-
SVL75-3.
-
SVL97-3.
-
SVL110-3.
The SVL97-2 also remains listed in Kubota’s sales material alongside newer equipment. Its presence should be read as an availability listing, not proof that it is the newest generation in that size class.kubotausa+1
Kubota SVL65-2
The SVL65-2 is a smaller-frame compact track loader within the documented range.
Its maintenance coverage should include:
-
Engine oil and filtration.
-
Fuel-system cleanliness.
-
Hydraulic oil and filters.
-
Track tension.
-
Rollers, idlers and sprockets.
-
Travel-drive servicing.
-
Loader linkage.
-
Cooling-pack cleanliness.
-
Attachment locking equipment.
Kubota documents a tilting cab and rear service access on this model. Follow the correct access and support procedures rather than assuming that instructions for another SVL apply.kubotausa
Kubota SVL65-2s
The SVL65-2s is a documented model designation, not simply another spelling of SVL65-2.
Kubota identifies an Advanced Multifunction Valve on the SVL65-2s, intended to support simultaneous auxiliary, bucket and loader-arm operation. Hydraulic troubleshooting should therefore use the correct generation’s information.kubotausa
Do not assume that every hydraulic component, control setting or parts application is identical to the earlier SVL65-2.
Kubota SVL75 and SVL75-2
The original SVL75 and later SVL75-2 require separate entries in a maintenance and repair directory.
Kubota’s parts resources document both machines, and their service requirements should be checked independently. An original SVL75 manual is not a substitute for the correct SVL75-2 manual.shop.kubotausa+1
Typical ownership priorities include undercarriage wear, travel-drive servicing, cooling, hydraulic filtration, loader-joint condition and attachment compatibility.
Kubota SVL75-3
The SVL75-3 introduces equipment and control features that differ from earlier SVL75 generations.
Kubota documents:
-
An Advanced Multifunction Valve.
-
Selectable track-response settings.
-
Updated display-based adjustments.
-
Generation-specific undercarriage details.
A change in travel response or simultaneous hydraulic operation should be assessed against the machine’s settings and specifications before being treated as a mechanical fault.kubotausa
Kubota SVL90 and SVL90-2
Both the SVL90 and SVL90-2 are verified legacy models.
Their inclusion matters because older SVL machines should not be grouped automatically under later SVL95 or SVL97 repair information. Kubota’s OEM resources retain separate listings for these machines.shop.kubotausa+1
On used examples, establish the service history and inspect previous repairs before ordering major assemblies.
Kubota SVL95-2s
The SVL95-2s is a documented previous-generation model with extensive OEM parts coverage.
Accurate serial-number identification is particularly important. Kubota’s parts resources show production changes affecting fuel-system components, wiring, cab assemblies and other equipment within the same model designation.shop.kubotausa+2
Do not select parts from the model name alone.
Kubota SVL97-2 and SVL97-3
The SVL97-2 and SVL97-3 are separate generations.
The SVL97-2 has its own manufacturer brochure and parts catalogue, while newer product information documents the SVL97-3. Maintain separate service and troubleshooting information for each.kubotausa+2
Check the installed engine, exhaust-treatment equipment, hydraulic options and control features before applying repair advice.
Kubota SVL110-3
Kubota introduced the SVL110-3 in March 2026, with dealer availability announced from April 2026.
The manufacturer identifies a 112.7 hp engine, auxiliary flow of 45 US gpm and an Auxiliary Performance System that manages hydraulic power between travel and attachment operation. These features make attachment configuration and electronic diagnostics important parts of troubleshooting.kubotausa
Its high auxiliary-flow capability does not remove the need to verify attachment pressure, return plumbing, case-drain requirements and operating limits.
Configuration Codes and Alternative Listings
SVL catalogue entries contain additional letters identifying equipment configurations. These should not be presented as separate principal model families.
Record the complete designation and establish the actual equipment fitted, including:
-
Cab or canopy.
-
Standard-flow or high-flow hydraulics.
-
Track width.
-
Attachment electrical connections.
-
Coupler arrangement.
-
Cameras.
-
Additional guarding.
-
Special-application equipment.
Kubota’s configuration listings show numerous extended designations within the SVL65-2s, SVL75-3 and SVL97 families.kubotausa
Listings may also abbreviate SVL95-2s to “SVL95-2,” particularly in accessory descriptions. Verify the machine and assembly rather than assuming the shortened wording establishes a different model.shop.kubotausa
Identify Your Kubota SVL Before Buying Parts
Record:
-
Complete model designation.
-
Machine serial number.
-
Engine model and serial number.
-
Country and emissions specification.
-
Hydraulic-flow configuration.
-
Track specification.
-
Cab or canopy arrangement.
-
Attachment-coupler type.
-
Attachment identification.
-
Major component numbers.
-
Previous modifications or repairs.
Why Serial Numbers Matter
Changes can occur during production without a new principal model name.
For example, Kubota’s SVL95-2s fuel-system diagrams separate piping, filters and separator applications at specified serial-number breaks. Wiring and cab parts have additional restrictions.shop.kubotausa+2
Photograph identification plates and keep them with service invoices.
Do Not Confuse SVL and SSV Maintenance
SVL machines are compact track loaders. SSV machines are wheeled skid steer loaders.
Do not transfer SSV drive-chain-case instructions to an SVL. SVL documentation instead identifies travel-drive servicing and tracked-undercarriage maintenance appropriate to the machine.kubota+1
Kubota SVL Compact Track Loader Maintenance
A maintenance programme should combine daily inspections, first-service requirements, scheduled servicing and condition-based repairs.
Do not apply one schedule across the entire series. Even travel-drive oil requirements differ between generations: the original SVL75 documentation and newer SVL75-3 documentation identify different first-change intervals.kubota+1
Daily and Pre-Start Checks
Follow the machine’s prescribed inspection routine.
Typical checks include:
-
Engine oil.
-
Coolant.
-
Hydraulic oil.
-
Fuel level and visible fuel-system condition.
-
DEF where fitted.
-
Air-cleaner warning indicator.
-
Cooling-pack cleanliness.
-
Hydraulic hoses.
-
Tracks.
-
Loose hardware.
-
Loader linkage.
-
Attachment locking.
-
Warning displays.
-
Operator-restraint and control systems.
The original SVL75 operator’s manual includes daily checks of fluids, air-cleaner indication, radiator and oil cooler, belts, wiring and visible damage. Use the applicable manual to establish the corresponding routine for later machines.kubota
Engine Oil and Filter Servicing
Use the specified oil, filter and interval for the installed engine.
A service should include:
-
Confirming the correct filter.
-
Following the draining procedure.
-
Inspecting for unusual contamination.
-
Replacing required sealing parts.
-
Refilling correctly.
-
Completing the final level check.
-
Checking for leakage.
The original SVL75 manual specifies checking on level ground after the prescribed settling period. This illustrates why a nominal refill quantity should not replace the correct dipstick procedure.kubota
Investigate unexplained oil loss or a rising oil level rather than repeatedly correcting the level.
Fuel Filters and Water Separation
Routine maintenance should follow the requirements for:
-
Fuel filters.
-
Water separators.
-
Tank drainage.
-
Accessible hoses.
-
Priming after service.
-
Clean refuelling equipment.
Check the serial-number application when purchasing fuel-system components.
If starting difficulties begin immediately after filter replacement, verify the work and prescribed priming procedure before assuming an injection-system failure.
Do not loosen high-pressure injection pipes as a generic bleeding test.
Air-Cleaner Maintenance
Inspect the complete intake system:
-
Filter elements.
-
Housing.
-
Sealing surfaces.
-
Intake hoses.
-
Clamps.
-
Signs of dirt bypass.
Follow the permitted cleaning and replacement instructions. Dusty conditions may require additional attention under the machine’s service guidance.
Do not assume an element is serviceable simply because loose dirt has been removed.
Cooling-Pack Maintenance
Cooling access and layout vary by generation.
Inspect:
-
Screens.
-
Radiator.
-
Oil cooler.
-
Debris between cooling components.
-
Damaged fins.
-
Hoses.
-
Belts.
-
Visible leakage.
The SVL110-3, for example, has a tool-free swing-out radiator arrangement described by Kubota. That access feature should not be assumed present on every older SVL.kubotausa
Clean using the prescribed method and never open a pressurised cooling system while hot.
Hydraulic Oil and Filters
Identify the complete filtration arrangement rather than replacing only the most accessible filter.
Depending on the machine, scheduled work can involve:
-
Hydraulic filters.
-
Return filters.
-
Suction components.
-
Breathers.
-
Hydraulic oil.
SVL75-2 documentation distinguishes first-change requirements from later intervals and provides separate guidance for hydraulic-hammer use. Match the schedule to the actual machine and duty cycle.manualsnet
Before opening the system:
-
Clean the area.
-
Lower equipment as instructed.
-
Shut down.
-
Release stored pressure correctly.
-
Protect open ports.
-
Keep replacement components clean.
Check oil level in the prescribed machine position and temperature conditions.
Track Cleaning and Inspection
Inspect the whole undercarriage:
-
Track cuts.
-
Exposed reinforcement.
-
Missing rubber.
-
Damaged guide features.
-
Rollers.
-
Idlers.
-
Sprockets.
-
Guards.
-
Frame damage.
-
Packed material.
Remove accumulated material using the approved safe method.
Do not assess track condition solely by remaining tread depth.
Track-Tension Adjustment
Use the measurement points and support procedure for the exact model and track specification.
Do not copy a sag figure from another SVL or use a generic tensioning method.
Kubota’s original SVL75 instructions link correct tension to preventing track slippage. Workshop information also warns against relying on hydraulically supported equipment during tension checks.kubota+1
Track-adjustment components can retain substantial force. Do not remove fittings or dismantle assemblies casually.
Rollers, Idlers and Sprockets
Inspect for:
-
Leakage.
-
Uneven wear.
-
Damaged flanges.
-
Abnormal noise.
-
Loose hardware.
-
Sprocket wear.
-
Contact marks suggesting misalignment.
Some newer components are described as sealed and lubricated for life. This does not mean they should be excluded from condition inspections.kubotausa
Travel-Drive Oil
Where separately lubricated drive units are fitted, follow the specified:
-
Lubricant.
-
Level-checking method.
-
Plug positions.
-
First-change requirement.
-
Subsequent service interval.
Do not confuse drive-unit gear oil with main hydraulic oil.
The original SVL75 and newer SVL75-3 documentation demonstrate why drive servicing must remain generation-specific.kubota+1
Loader Linkage and Coupler
Follow the lubrication chart and inspect:
-
Loader-arm pivots.
-
Cylinder pivots.
-
Bucket linkage.
-
Attachment mounting faces.
-
Locking components.
-
Retainers.
-
Hydraulic coupler equipment where fitted.
Greasing cannot correct excessive wear.
Verify attachment engagement using the prescribed procedure before work. Operating a locking switch is not, by itself, proof of secure attachment retention.
Cab and Safety Controls
Inspect:
-
Seat belt.
-
Seat mounting.
-
Armrests and restraint equipment.
-
Control locks.
-
Door operation.
-
Warning display.
-
Cameras and mirrors.
-
Protective structure.
Do not bypass a safety switch to keep the loader working.
Kubota SVL Parts Guide
Filters and Service Kits
Common service items include:
-
Engine oil filters.
-
Fuel filters.
-
Separator elements.
-
Air-cleaner elements.
-
Hydraulic filters.
-
Breathers.
-
Cab filters.
-
Belts.
-
Sealing washers.
-
Approved fluids.
Compare kit contents with the serial-number application and work due. A shared kit description does not prove that every service requirement is identical across models.
Tracks and Undercarriage Parts
Parts can include:
-
Rubber tracks.
-
Rollers.
-
Idlers.
-
Sprockets.
-
Adjuster components.
-
Guards.
-
Frame-related parts.
-
Mounting hardware.
Verify the complete application. Track width alone is insufficient to establish compatibility.
Pins, Bushes and Loader Joints
A complete joint repair may require:
-
Pins.
-
Bushes.
-
Seals.
-
Shims.
-
Retainers.
-
Grease fittings.
-
Associated fasteners.
-
Repair of damaged mounting bores.
Inspect the whole assembly before ordering a pin kit.
Hydraulic Hoses and Couplers
Replacement lines must match the application, fittings, pressure requirements, routing and movement allowance.
Correct rubbing, twisting, stretching or trapping that contributed to the original failure.
Cylinder Seal Kits
Identify the correct cylinder assembly before purchasing seals.
Inspect the rod and other components before deciding that resealing alone is sufficient.
A weak or drifting movement does not automatically establish a cylinder-seal failure.
Pumps, Motors and Valves
Purchase major assemblies after diagnosis.
Confirm:
-
Affected functions.
-
Temperature-related behaviour.
-
Fluid and filter history.
-
Warning information.
-
Component identity.
-
Contamination condition.
-
Prescribed test results.
Control-valve design differs between generations, including the multifunction systems described on newer SVL machines.kubotausa+1
Electrical and Emissions Parts
Before replacing a sensor, switch, solenoid or controller:
-
Preserve codes.
-
Inspect wiring and connections.
-
Follow the correct diagram.
-
Confirm the part application.
-
Check setup or calibration requirements.
A code description identifies a diagnostic route; it does not necessarily prove that the named sensor is defective.
Kubota SVL Problems and Repairs
The following are general diagnostic categories, not defects proven to affect every model.
Engine Will Not Crank
Separate:
-
No power.
-
Display power but no starter response.
-
A single click.
-
Repeated clicking.
-
Slow rotation.
-
Intermittent operation.
Check the prescribed starting conditions and electrical supply using the correct procedure.
Do not bridge terminals or bypass safety interlocks.
Engine Cranks but Will Not Start
Record whether the problem followed:
-
Running out of fuel.
-
Filter replacement.
-
Refuelling.
-
Storage.
-
Cold weather.
-
Electrical work.
-
Washing.
Verify the starting and priming procedure before assuming a major engine or injection-system failure.
Engine Runs but Loader Will Not Move
Treat engine operation and travel enable as separate issues.
Record:
-
Warning indicators.
-
Parking-brake indication.
-
Operator-restraint status.
-
Whether lift and tilt operate.
-
Whether auxiliaries operate.
-
Whether the problem is intermittent.
Do not automatically replace a drive motor because the engine runs but travel is disabled.
Lift or Tilt Will Not Operate
Establish whether:
-
Both functions are affected.
-
Only one movement fails.
-
Travel remains normal.
-
Warnings appear.
-
The fault changes with temperature.
-
Recent repairs preceded it.
Use the diagnostic information for the installed control system.
Hydraulics Are Weak or Slow
Determine whether the complaint affects:
-
Lift.
-
Tilt.
-
Travel.
-
Auxiliary operation.
-
Several functions together.
-
Performance only when hot.
Check operating settings and service history before major component replacement.
Newer machines can offer settings that change response or attachment performance. Confirm configuration before interpreting a different operating feel as a mechanical failure.kubotausa+1
One Track Is Weak or the Loader Pulls
Record forward and reverse behaviour under comparable, safe conditions.
Inspect track adjustment and undercarriage condition first.
Note:
-
Temperature effects.
-
Abnormal noise.
-
Leakage.
-
Recent track or drive repairs.
-
Whether other hydraulics are weak.
A weak track requires testing, not an automatic drive-unit purchase.
Track Repeatedly Comes Off
Inspect the complete undercarriage.
Check track condition, adjustment, rollers, idlers, sprockets, alignment and hardware.
Repeatedly refitting the track without finding the cause can leave the fault unresolved.
Travel-Drive Noise or Leakage
Record which side is affected and when the symptom appears.
Check the applicable oil-service history and inspect for visible damage.
Do not continue working with a significant new drive noise or substantial oil loss while waiting for the fault to become more obvious.
Engine or Hydraulic Overheating
Stop for a serious warning or visible fluid loss.
After safe cooling, inspect the relevant system.
Record the work being performed and distinguish engine-coolant temperature from hydraulic-oil temperature.
An attachment-related temperature rise requires investigation of both machine condition and attachment requirements.
Attachment Will Not Operate Correctly
Determine whether the fault follows the attachment or stays with the loader.
Check:
-
Selected attachment settings.
-
Standard-flow or high-flow equipment.
-
Required pressure.
-
Coupler connection.
-
Continuous-flow controls.
-
Case drain.
-
Electrical connections.
-
Attachment maintenance.
Optional high-flow systems appear across several SVL models, but available flow and adjustment features differ. Do not assume every machine has the same capability.kubotausa+1
DPF, DEF and SCR Warnings
Identify the installed emissions equipment first.
Do not combine DPF regeneration and DEF/SCR diagnosis into one universal repair procedure. DEF equipment is documented on newer larger models, but that does not establish the same arrangement on every SVL.kubotausa
Preserve codes and follow the correct warning sequence.
Repeated warnings need diagnosis rather than repeated clearing or regeneration attempts.
Loader Arms or Bucket Drift
Lower equipment and keep clear of unsupported attachments.
The symptom alone does not identify whether the fault involves a cylinder, valve or another circuit component.
Use the prescribed tests before ordering seals.
Hydraulic Leaks
Identify the source safely. Oil can travel along hoses or structures before dripping.
Never use hands to locate a pressurised leak. Follow the shutdown and pressure-release instructions before opening the system.
A suspected hydraulic injection injury requires immediate emergency medical attention.
Safe Kubota SVL Repairs
Before maintenance:
-
Park on firm, level ground.
-
Lower equipment where possible.
-
Shut down as instructed.
-
Prevent unintended starting or movement.
-
Release stored pressure correctly.
-
Allow hot components to cool.
-
Use approved supports and locking arrangements.
When raised loader arms are necessary, use the manufacturer’s lift-arm stopper and follow its installation procedure. Never rely on hydraulics alone. Kubota’s SVL75 instructions explicitly require the stopper for maintenance with raised arms.sunflowerrental
Cab tilting, undercarriage lifting, major drive repairs and high-pressure testing require the correct instructions and equipment.
Inspecting a Used Kubota SVL
A useful inspection combines identification, records, cold starting and observation after normal warming.
Check:
-
Model and serial number.
-
Engine identification.
-
Hydraulic options.
-
Track specification.
-
Undercarriage wear.
-
Drive-unit leakage.
-
Cooling-pack condition.
-
Loader-linkage movement.
-
Coupler condition.
-
Safety controls.
-
Warning history.
-
Modified wiring.
-
Previous structural repairs.
Obtain an independent inspection where significant hydraulic, drive or structural concerns are present.
Frequently Asked Questions
Which early SVL models should be included in a legacy directory?
The original SVL75, original SVL90 and SVL90-2 should be included alongside later generations. Kubota’s OEM resources document these machines separately.shop.kubotausa+2
Is SVL65-2s the same designation as SVL65-2?
No. Kubota lists them separately and documents updated hydraulic features on the SVL65-2s.kubotausa+1
Is SVL95-2s different from SVL95-2S?
The lowercase and uppercase “s” forms are used for the same model designation in product and parts information. Always verify the complete machine application.shop.kubotausa+1
Do SVL loaders use SSV chain-case maintenance instructions?
No. Use the SVL travel-drive and undercarriage requirements in the applicable manual rather than transferring instructions from the wheeled SSV range.kubota+1
Does every SVL have high-flow hydraulics?
No. High flow is optional on several models, and capacities differ. Confirm the actual installation before selecting an attachment.kubotausa+1
Can one track-tension measurement cover the entire SVL range?
Do not assume so. Use the specified measurement, track position and supporting procedure for the exact machine.
Should weak hydraulics automatically lead to pump replacement?
No. Establish the affected functions, check settings and service history, and carry out the prescribed tests first.