Kubota KW Series Wheeled Excavators: Maintenance, Parts and Repair Guide
Kubota KW Series wheeled excavator maintenance combines engine and hydraulic servicing with checks of the tyres, axles, transmission, steering and braking systems. Unlike a tracked excavator, a wheeled machine needs a maintenance plan that addresses both excavation work and travel.
This guide covers verified Kubota KW models, routine servicing, replacement parts and general troubleshooting. It explains how to approach starting problems, overheating, weak hydraulics, travel faults, steering issues, brake warnings and attachment problems before progressing to model-specific repair instructions.
Exact service intervals, fluid specifications, tyre pressures, wheel-fastener torque settings and diagnostic values must come from the documentation for the individual machine.
Kubota KW Series Models: Current and Legacy Directory
The verified Kubota KW wheeled excavator range consists of:
-
Kubota KW095.
-
Kubota KW115.
Both appear in Kubota’s European wheeled excavator product information and combined manufacturer brochure. I could not verify any additional production KW models or discontinued earlier KW generations from the manufacturer material reviewed. Additional legacy model names should therefore not be added without supporting documentation.kuk.kubota-eu+2
Kubota KW095
The KW095 is the smaller of the two documented KW machines.
Kubota’s combined brochure gives an operating-weight range of approximately 9,900–11,500 kg, depending on configuration. Equipment choices include different tyres, support arrangements, hydraulic options and travel specifications.kubota-eu
Maintenance priorities include:
-
Engine and exhaust-aftertreatment servicing.
-
Hydraulic cleanliness and filtration.
-
Tyres and wheel hardware.
-
Axles and travel transmission.
-
Steering and braking.
-
Support blade and stabilising equipment.
-
Variable-boom joints.
-
Attachment controls and couplers.
The model designation alone is not enough to establish the correct service parts or machine settings.
Kubota KW115
The KW115 is the larger machine in the verified range.
Kubota’s combined brochure lists an operating-weight range of approximately 11,000–12,800 kg, depending on equipment. Its working dimensions and attachment arrangements differ from the KW095, so similarly described components must still be checked by application.kubota-eu
Maintenance coverage should include the same major systems as the KW095, with particular attention to the machine’s actual boom, arm, tyre and support configuration.
Engine and Equipment Variants Are Not Separate Models
Kubota documents a standard 55 kW engine configuration and an optional 80 kW configuration for the KW range. Its Stage V information distinguishes the associated exhaust-treatment arrangements:
-
The 55 kW configuration uses EGR and DOC/DPF equipment.
-
The 80 kW configuration adds SCR exhaust aftertreatment.
These are configuration differences within the documented range, not evidence of additional KW model names.kubota-eu
Other specification differences can include:
-
Single or twin tyres.
-
Steering equipment.
-
Travel-speed package.
-
Boom and arm arrangement.
-
Rear stabilisers.
-
Split-blade equipment.
-
Automatic lubrication.
-
Quick coupler.
-
Auxiliary hydraulic circuits.
Record these details before ordering parts or following an adjustment procedure.
Understanding KW Wheeled Excavator Maintenance
A wheeled excavator combines several systems that need separate attention.
The digging equipment may operate normally while the machine has a travel or braking fault. Equally, a machine that travels correctly may still have an attachment-control or lifting-system problem.
Kubota’s KW brochure describes load-sensing hydraulics, electro-hydraulic controls, a travel transmission, driven axles, hydraulic axle locking and multiple support configurations. Treat these as distinct diagnostic areas rather than grouping every complaint under “hydraulic problems.”kubota-eu
Keep Travel and Working Configurations Separate
Before using or inspecting the machine, establish its required configuration for the task.
Check the applicable instructions for:
-
Upperstructure position.
-
Boom and attachment position.
-
Steering mode.
-
Axle-locking arrangement.
-
Support blade and stabilisers.
-
Travel-speed selection.
-
Attachment retention.
-
Lights and visibility equipment.
A manufacturer-listed travel speed does not, by itself, establish that a particular machine is legally equipped or authorised for public-road use.
Identify Your Kubota KW Before Buying Parts
Record the following information:
-
Complete machine designation.
-
Machine serial number.
-
Engine identification.
-
Engine power configuration.
-
Country and emissions specification.
-
Tyre arrangement.
-
Axle and transmission identification.
-
Steering options.
-
Support blade or stabiliser configuration.
-
Boom and arm specification.
-
Quick-coupler identification.
-
Attachment make, model and serial number.
-
Relevant software or control-system information.
Confirm the Engine and Emissions Configuration
The published KW range uses the Kubota V3800 engine family, but the power and exhaust-treatment configurations differ.
Do not assume that every filter, sensor, exhaust component or diagnostic procedure is identical across both engine options. Match the installed equipment and emissions specification before purchasing parts.kubota-eu
Keep a Detailed Service Record
A useful record includes:
-
Date and operating hours.
-
Work performed.
-
Fluids used.
-
Filter and replacement-part numbers.
-
Warning codes.
-
Measurements.
-
Software-related work.
-
Outstanding repairs.
-
Attachment changes.
Photograph identification plates and component tags. This is particularly helpful where optional equipment changes the correct parts application.
Kubota KW Series Maintenance
Build the maintenance plan around the operator’s manual, engine requirements and fitted attachments.
The servicing categories below explain what needs attention. They are not a substitute for the machine’s exact service chart.
Daily and Pre-Start Checks
Follow the prescribed walk-around routine.
Typical inspection areas include:
-
Engine oil level.
-
Coolant level.
-
Hydraulic oil level.
-
Fuel-system condition.
-
DEF level where applicable.
-
Visible leaks.
-
Cooling-pack obstruction.
-
Tyres and wheels.
-
Accessible hoses.
-
Attachment retention.
-
Boom and bucket linkage.
-
Support equipment.
-
Warning displays.
-
Mirrors and cameras.
-
Lights.
-
Seat belt and operator controls.
Kubota provides ground-level access to central service areas and identifies accessible filters, battery, cooling equipment, oil-level checks and belts as KW maintenance features. Accessibility makes inspection easier; it does not remove the need to follow the correct procedure.kuk.kubota-eu+1
Engine Oil and Filter Servicing
Use the specified oil and filter for the installed engine configuration.
An oil service should include:
-
Confirming the correct specification.
-
Following the prescribed draining procedure.
-
Inspecting for unusual contamination.
-
Replacing required sealing parts.
-
Refilling correctly.
-
Completing the specified level check.
-
Inspecting for leakage after servicing.
Do not use a nominal capacity as a substitute for the final level-checking procedure.
Investigate unexplained oil loss or a rising oil level instead of repeatedly correcting the level without identifying the cause.
Fuel-System Maintenance
The KW engine installation uses common-rail injection. Routine servicing and fuel-system diagnosis therefore need to follow the appropriate engine documentation.kubota-eu
Relevant maintenance includes:
-
Replacing specified filters.
-
Inspecting any fitted separator.
-
Checking accessible hoses.
-
Keeping refuelling equipment clean.
-
Protecting open connections.
-
Following the prescribed priming procedure.
Do not loosen high-pressure injection pipes as a generic bleeding or starting test.
Air-Cleaner Maintenance
Inspect the complete intake system, including:
-
Housing.
-
Main element.
-
Safety element where fitted.
-
Intake hoses.
-
Clamps.
-
Sealing surfaces.
-
Signs of dirt bypass.
Kubota’s KW specification identifies a dry air cleaner with a pre-separator, main element and safety element. Follow the applicable instructions for each component rather than treating them as interchangeable filters.kubota-eu
Cooling-System Maintenance
The KW cooling installation serves several systems. Kubota describes a combined cooling arrangement for engine coolant, hydraulic oil and charge air, with configuration-dependent equipment.kubota-eu
Inspect:
-
Cooling-pack obstruction.
-
Debris trapped between components.
-
Damaged fins.
-
Coolant hoses.
-
Clamps.
-
Belts.
-
Visible leakage.
-
Fan-area damage.
Use the prescribed cleaning method and avoid damaging the fins.
Never open a pressurised cooling system while hot.
Hydraulic Oil and Filters
Hydraulic maintenance requires correct fluid, suitable filtration and contamination control.
Before opening the circuit:
-
Clean around connections.
-
Lower equipment as instructed.
-
Shut down the machine.
-
Release stored pressure using the prescribed procedure.
-
Protect open ports.
-
Keep replacement parts clean.
Check the level in the specified machine position and conditions.
Kubota lists different hydraulic-oil options in the KW brochure. Do not assume that a generic excavator oil is suitable or mix unidentified products.kubota-eu
Axles and Travel Transmission
The KW travel system needs its own service requirements.
Where specified, inspect or service:
-
Axle lubricant.
-
Transmission lubricant.
-
Hubs.
-
Seals.
-
Drain and level plugs.
-
Mounting hardware.
-
Relevant filters.
-
Visible leaks.
-
Abnormal operating noise.
Use the exact lubrication and level-checking procedure. Do not assume that axle oil, transmission oil and main hydraulic oil are interchangeable.
Tyres and Wheels
Tyre maintenance is central to both travel performance and working stability.
Check:
-
Correct tyre specification.
-
Inflation according to the applicable instructions.
-
Cuts and sidewall damage.
-
Embedded objects.
-
Uneven wear.
-
Wheel damage.
-
Fasteners.
-
Twin-wheel condition and spacing where applicable.
Kubota offers different single- and twin-tyre configurations across the KW range. Parts and pressures must match the actual installation, not simply the model name.kubota-eu
Do not undertake heavy-equipment wheel or tyre work without the correct equipment and competence.
Steering and Axle Locking
Inspect accessible steering components and look for leakage, damage or excessive movement.
Record any:
-
Uneven steering response.
-
Warning indication.
-
Difficulty selecting a mode.
-
Abnormal wheel alignment.
-
Unexpected axle movement.
-
Change after servicing.
All-wheel steering is configuration-dependent in Kubota’s specification. Do not assume every machine has the same modes or calibration requirements.kubota-eu
Braking Systems
KW braking equipment requires specialist attention where a fault is suspected.
Kubota’s brochure describes a dual-circuit service-brake system with a pressure accumulator, a parking brake and an automatic work-brake arrangement. These have different functions and should not be treated as one interchangeable system.kubota-eu
Report abnormal braking, warning indications or unexpected movement immediately. Do not continue using the machine to see whether the problem clears.
Boom, Arm and Attachment Lubrication
Follow the lubrication chart for:
-
Boom joints.
-
Adjustment joints.
-
Arm pivots.
-
Bucket linkage.
-
Quick coupler.
-
Support equipment.
-
Specified swing-related points.
Where automatic central lubrication is fitted, inspect its operation rather than assuming every joint is receiving grease.
Kubota offers automatic lubrication for the upperstructure and equipment, while undercarriage lubrication arrangements are listed separately. An automatic system therefore does not necessarily cover every maintenance point.kubota-eu
Support Blade and Stabiliser Maintenance
Inspect the installed support arrangement for:
-
Damaged pads or contact surfaces.
-
Loose pins.
-
Excessive joint movement.
-
Hydraulic leaks.
-
Damaged rods.
-
Missing retainers.
-
Uneven operation.
-
Structural damage.
The available configurations include different blade and stabiliser arrangements. Use the correct operating and servicing instructions for the fitted equipment.kubota-eu
Cab Filters, Visibility and Controls
Include:
-
Cab air filters.
-
Windscreen washers and wipers.
-
Mirrors.
-
Cameras.
-
Lights.
-
Door retention.
-
Seat belt.
-
Joysticks.
-
Pedals.
-
Display warnings.
A camera image does not eliminate the need for clean glass, correctly positioned mirrors and the prescribed visibility checks.
Kubota KW Excavator Parts Guide
Filters and Service Kits
Common service items can include:
-
Engine oil filter.
-
Fuel filters.
-
Air-cleaner elements.
-
Hydraulic filters.
-
Cab filters.
-
Belts.
-
Sealing washers.
-
Approved fluids.
Confirm the kit contents against the machine configuration and work due. A service kit may not include every item required by calendar age, operating hours or condition.
Tyres, Wheels and Axle Parts
Identify:
-
Tyre arrangement.
-
Wheel specification.
-
Axle assembly.
-
Hub components.
-
Seals.
-
Steering joints.
-
Relevant hardware.
Do not order tyre or wheel parts using operating weight alone.
Hydraulic Hoses and Pipes
Replacement lines must match:
-
Application.
-
Pressure requirements.
-
Fittings.
-
Length.
-
Routing.
-
Movement allowance.
-
Protective arrangements.
Check why the old line failed. Replacing it without correcting rubbing, trapping or stretching can lead to another failure.
Cylinder Parts
Match seal kits to the correct cylinder assembly.
Inspect the rod and other components before deciding that resealing alone is sufficient.
The KW range includes load-holding and hose-burst protection equipment associated with particular cylinders. These safety-related components must not be bypassed or replaced with an unverified alternative.kubota-eu
Pumps, Motors and Control Valves
Purchase major hydraulic assemblies after diagnosis.
Confirm:
-
Affected functions.
-
Temperature-related behaviour.
-
Service history.
-
Warning information.
-
Component identity.
-
Contamination condition.
-
Prescribed test results.
Load-sensing and electronically managed systems require the correct diagnostic procedure. External similarity between components is not proof of compatibility.
Quick Couplers and Attachments
Check both machine and attachment identification when buying:
-
Coupler components.
-
Locking parts.
-
Bucket pins.
-
Rotator parts.
-
Hydraulic connections.
-
Electrical connectors.
-
Wear parts.
Kubota documents several coupler and attachment-control options. A component suitable for one installation may not suit another KW machine with a different coupler package.kubota-eu
Kubota KW Wheeled Excavator Problems and Repairs
The following sections describe general diagnostic priorities, not defects proven to affect every KW095 or KW115.
Engine Will Not Crank
Distinguish between:
-
No electrical power.
-
Display power but no starter response.
-
A single click.
-
Repeated clicking.
-
Slow rotation.
-
Intermittent operation.
Check the prescribed starting conditions and electrical supply using the correct procedure.
The KW specification uses a 24 V electrical system. Do not assume that instructions intended for a small 12 V excavator are suitable for charging, jump-starting or diagnosis.kubota-eu
Never bypass starting interlocks or bridge terminals to operate the machine.
Engine Cranks but Will Not Start
Record whether the fault followed:
-
Running out of fuel.
-
Filter replacement.
-
Refuelling.
-
Storage.
-
Cold weather.
-
Electrical work.
-
Washing.
Preserve warning information and follow the correct starting and priming instructions.
Common-rail diagnosis requires the proper equipment and procedures.
Engine Overheats
Stop work for a serious temperature warning or visible coolant loss.
After safe cooling, inspect the appropriate system and record:
-
Time before the warning.
-
Work being performed.
-
Ambient conditions.
-
Whether travel or attachment use triggers it.
-
Other warnings.
-
Recent repairs.
Because the cooling installation serves several systems, establish which temperature is abnormal before deciding on a repair.kubota-eu
Hydraulics Are Slow or Weak
Determine whether the fault affects:
-
All working functions.
-
One cylinder.
-
Swing.
-
Travel.
-
An attachment.
-
Performance only when hot.
Confirm the selected operating mode and any attachment settings before assuming a mechanical failure.
Kubota provides selectable working modes and configurable attachment settings, so configuration should form part of the investigation. Do not alter pressure settings to compensate for an unidentified fault.kubota-eu
Excavator Will Not Travel
Separate:
-
No movement.
-
Weak movement.
-
Failure in one direction.
-
Loss of a travel range.
-
Failure only when hot.
-
Travel accompanied by noise.
Record warning information, brake behaviour and recent work.
A travel complaint can involve controls, braking, transmission or hydraulic systems. Do not automatically purchase a travel motor.
Steering Is Abnormal
Stop using the machine if steering is unreliable.
Record the selected mode, wheel response, warnings and whether the problem followed maintenance or tyre changes.
Do not attempt calibration or sensor adjustment without the proper procedure.
Brake Warning or Unexpected Movement
Stop work and secure the machine according to its instructions.
Do not rely on a different brake function to compensate for a suspected fault.
Accumulator-related and other stored-pressure repairs require specialist procedures. Do not open braking components based on a general hydraulic repair guide.
Axle Locking or Stability Concerns
Unexpected axle movement or an axle-lock warning requires investigation before digging or lifting continues.
Confirm the required operating configuration using the manual. Do not bypass an axle-locking system or use stabilisers to conceal an unresolved fault.
Stabiliser or Blade Will Not Operate
Record whether:
-
One function or several are affected.
-
Movement is absent or weak.
-
Operation is uneven.
-
Leakage is visible.
-
A warning appears.
-
The fault changes with temperature.
Do not work beneath unsupported equipment or reach into a moving support mechanism.
Boom or Attachment Drifts
Drift requires testing of the relevant circuit.
Lower equipment and keep clear. The symptom alone does not identify whether the fault involves a cylinder, control valve, load-holding component or another part of the system.
Never adjust or bypass a safety valve to stop a symptom.
Attachment Will Not Operate Correctly
Determine whether the fault follows the attachment or remains with the excavator.
Check:
-
Selected attachment profile.
-
Required flow and pressure.
-
Coupler connection.
-
Return arrangement.
-
Case drain.
-
Electrical connections.
-
Attachment maintenance.
The KW brochure describes stored attachment settings and optional hydraulic arrangements. A physically connected attachment may still be incorrectly configured.kubota-eu
DPF, SCR and DEF Warnings
Identify the installed emissions configuration first.
DPF and SCR faults are not the same issue. Follow the correct warning sequence and preserve codes before clearing them.
Do not assume that the brochure’s extended DPF maintenance figure means the system needs no inspection, regeneration management or fault diagnosis before that point. The operating manual controls the actual servicing and warning response.kubota-eu
Hydraulic Leaks
Identify the source safely. Oil can travel along hoses or structures before dripping.
Never use hands to locate a pressurised leak. Follow the specified shutdown and pressure-release procedure.
A suspected hydraulic injection injury requires immediate emergency medical attention.
Safe Kubota KW Repairs
Before maintenance:
-
Park on suitable ground.
-
Follow the required parking configuration.
-
Lower equipment as instructed.
-
Stop the engine.
-
Prevent unintended starting or movement.
-
Release stored pressure using the correct procedure.
-
Allow hot systems to cool.
-
Use approved supports and locking arrangements.
Never rely on hydraulics to support raised equipment during repairs.
Tyre work, braking repairs, accumulator work, major hydraulic testing and safety-system diagnosis require suitable competence, equipment and documentation.
For lifting operations, use the load chart for the actual machine and support arrangement. Kubota’s charts distinguish supported configurations and specify conditions such as firm, level ground and the required axle condition. One maximum lifting figure cannot represent every working position.kubota-eu
Frequently Asked Questions
Which Kubota KW excavator models are verified?
The manufacturer material reviewed documents KW095 and KW115. No additional production models or earlier discontinued KW generations were verified.kubota-eu
Are KW095 and KW115 parts interchangeable?
Some components may share applications, but compatibility must be checked by part number, serial range and configuration. Their different working dimensions and equipment options make assumptions unsafe.kubota-eu
Does every KW machine have the same emissions system?
No. Kubota’s Stage V specification distinguishes the 55 kW DOC/DPF arrangement from the 80 kW configuration with additional SCR treatment. Match the installed engine and market specification.kubota-eu
Does automatic lubrication cover every grease point?
Not necessarily. Kubota lists upperstructure automatic lubrication and undercarriage lubrication separately. Follow the complete lubrication chart for the installed system.kubota-eu
Can tracked-excavator maintenance instructions be used for a KW?
Only where the applicable KW documentation confirms the procedure. Tyres, axles, steering, brakes and travel equipment require wheeled-excavator instructions.
Should weak hydraulics automatically lead to pump replacement?
No. Check the affected functions, settings, service history and prescribed test results before purchasing a major assembly.