Kubota RT Series Articulated Loaders: Maintenance, Parts and Repair Guide
Kubota RT Series articulated loader maintenance combines engine or battery-system care with hydraulic servicing, articulation inspection and regular checks of the tyres, steering, brakes and attachment coupler. Telescopic versions also require inspection of their extending boom components.
And See:
- Kubota Construction Equipment Maintenance, Parts & Repair
- Kubota Excavator, Skid Steer and Track Loader Serial Number Lokup
This guide covers documented current and legacy Kubota RT models, maintenance priorities, replacement parts and general troubleshooting. It explains how to approach starting problems, weak travel, slow lifting, overheating, steering faults, charging issues and attachment problems before progressing to machine-specific repair instructions.
The RT range includes diesel and electric machines with different driveline arrangements. Exact service intervals, fluid specifications, adjustment procedures and diagnostic values must come from the documentation for the machine’s model, serial number and configuration.
Kubota RT Series Models: Current and Legacy Directory
The directory below brings together RT designations documented in Kubota’s UK and European construction and agricultural product resources.
It covers known principal models, previous generations and named variants. It is not a guaranteed complete worldwide historical production register. Availability varies by country, and an accessible product page does not necessarily mean a machine remains available new.
Diesel RT Models and Named Variants
Documented diesel models and generations include:
-
Kubota RT100.
-
Kubota RT100-2.
-
Kubota RT105T-2.
-
Kubota RT140.
-
Kubota RT150.
-
Kubota RT150-2.
-
Kubota RT160-2.
-
Kubota RT210.
-
Kubota RT210-2.
-
Kubota RT210-2α.
-
Kubota RT220-2α.
-
Kubota RT250-2.
-
Kubota RT260-2.
-
Kubota RT270.
-
Kubota RT270-2.
-
Kubota RT280.
-
Kubota RT280-2.
-
Kubota RT305T-2.
These designations appear across Kubota’s regional model directories and individual product pages. Alpha may be written as “α” or spelled out in dealer descriptions. Retain the complete designation when researching parts.kuk.kubota-eu+5
Electric RT Models
Verified electric models are:
-
Kubota RT210-2e.
-
Kubota RT220-2e.
Kubota documents these as battery-electric articulated compact loaders with separate electric motors for travel and working hydraulics. They require charging and electrical-system maintenance rather than diesel engine servicing.kuk.kubota-eu
Clearly Identified Legacy Models
Kubota explicitly categorises the following as older models in its UK construction information:
-
RT100.
-
RT150.
-
RT210.
Earlier RT140, RT270 and RT280 designations also appear in regional catalogues alongside later machines. Their production and availability status should be checked by market rather than inferred from the existence of a webpage.kubota-eu+4
Telescopic RT Models
The verified telescopic articulated models are:
-
RT105T-2.
-
RT305T-2.
These remain part of the RT articulated loader family. They should not be confused with Kubota’s separate KTH compact telehandler range.
Kubota describes extending-boom operation on the RT105T-2 and identifies the RT305T-2 as a telescopic articulated loader.kuk.kubota-eu+1
Model Numbers Do Not Establish Lifting Capacity
Do not interpret an RT model number as a safe working load.
Published figures can refer to different measurements, including:
-
Tipping load with the chassis straight.
-
Tipping load while articulated.
-
Maximum lifting capacity.
-
Capacity at a particular lift height.
-
Capacity with a specified attachment or counterweight.
Use the correct operating information and load chart for the actual configuration. Kubota’s RT product pages distinguish these categories, and figures from different categories should not be compared as though they mean the same thing.kuk.kubota-eu+2
Important Differences Within the RT Range
Diesel and Electric Machines Need Separate Service Plans
Diesel RT maintenance includes the installed engine’s requirements for oil, filters, fuel and cooling.
Electric RT maintenance instead includes:
-
Battery condition.
-
Charging equipment.
-
Electrical connectors.
-
Control-system warnings.
-
Applicable isolation procedures.
-
Electric drive and hydraulic-motor systems.
Electric machines still require hydraulic, articulation, tyre, coupler and loader-linkage inspections. The absence of an engine does not make the loader maintenance-free.
Kubota documents 48 V lithium-ion systems and different battery-capacity options for its electric RT loaders. Battery and charger compatibility must match the installed configuration.kuk.kubota-eu+1
Driveline Arrangements Vary
Do not apply one travel-system repair guide across the entire series.
For example:
-
Kubota documents individual hydraulic wheel motors on the RT100-2 and RT150-2.
-
Its legacy RT210 information describes a four-wheel-drive shaft transmission arrangement.
-
Electric RT machines use an electric travel motor and a separate motor for hydraulics.
These differences affect parts identification and the diagnostic route for weak travel or loss of drive.kuk.kubota-eu+3
Equipment Options Affect Maintenance
Before servicing, establish whether the machine has:
-
Cab, canopy or folding canopy.
-
Mechanical or hydraulic attachment locking.
-
Additional auxiliary circuits.
-
Proportional hydraulic controls.
-
Boom suspension.
-
Extra counterweights.
-
Special tyres.
-
Road-use equipment.
-
Load-holding safety equipment.
-
Telescopic boom.
-
Different battery capacity or charger.
Kubota documents numerous optional arrangements across RT machines. Do not assume every feature shown in a brochure is fitted to the loader being repaired.kuk.kubota-eu+2
Identify Your Kubota RT Before Buying Parts
Record:
-
Complete model designation.
-
Machine serial number.
-
Engine model and serial number on diesel machines.
-
Battery and charger identification on electric machines.
-
Country or market specification.
-
Tyre arrangement.
-
Driveline configuration.
-
Attachment-coupler type.
-
Auxiliary hydraulic options.
-
Boom specification.
-
Attachment identification.
-
Previous modifications or repairs.
Photograph identification plates and component tags.
Keep Machine and Attachment Records Separate
A replacement bucket, pallet fork, grapple or powered attachment may not be original to the loader.
Record the attachment’s identification separately. Its wear parts, locking components and hydraulic requirements may depend on the attachment rather than the RT model alone.
Maintain a Service and Fault Record
Include:
-
Date and operating hours.
-
Work completed.
-
Fluids used.
-
Filter and replacement-part numbers.
-
Warning messages.
-
Measurements.
-
Charging faults where applicable.
-
Repairs requiring follow-up.
For intermittent faults, record temperature, selected operating mode and which functions stop working.
Kubota RT Loader Maintenance
Build the service plan around the exact machine manual, engine or battery requirements and attachment documentation.
Some RT product pages mention a 500-hour engine maintenance interval. That is not a universal interval for every filter, lubrication point, inspection or calendar-based task.kuk.kubota-eu+1
Daily and Pre-Start Checks
Follow the prescribed inspection routine.
Relevant checks include:
-
Engine oil on diesel machines.
-
Coolant where applicable.
-
Hydraulic oil.
-
Fuel-system condition.
-
Battery charge and charging status on electric machines.
-
Visible leakage.
-
Cooling equipment.
-
Tyres and wheels.
-
Articulation joint.
-
Loader linkage.
-
Attachment locking.
-
Warning display.
-
Seat belt and protective structure.
-
Lights and visibility equipment.
Kubota identifies accessible daily checks for engine oil, coolant, air filter and radiator on its RT305T-2. Other models need the corresponding checks stated in their own documentation.kuk.kubota-eu
Engine Oil and Filter Servicing
For diesel models, use the specification and filter applicable to the installed engine.
A service should include:
-
Confirming engine identification.
-
Following the draining procedure.
-
Inspecting for unusual contamination.
-
Replacing specified sealing parts.
-
Refilling correctly.
-
Completing the final level check.
-
Checking for leakage.
Do not transfer filter applications between machines simply because both are RT loaders. Kubota documents different engines across the family, including D722, D1105 and V1505 installations.kuk.kubota-eu+2
Fuel-System Maintenance
Follow the requirements for:
-
Fuel filters.
-
Water separation where fitted.
-
Accessible hoses.
-
Tank drainage where specified.
-
Priming after service.
-
Clean refuelling equipment.
If starting difficulties appear immediately after filter replacement, verify the work and priming procedure before assuming a major fuel-system failure.
Identify the installed fuel system before attempting diagnosis. Do not use loosening injection pipes as a universal bleeding test.
Air-Cleaner Maintenance
Inspect:
-
Filter elements.
-
Housing.
-
Intake hoses.
-
Clamps.
-
Sealing surfaces.
-
Evidence of dirt bypass.
Follow the permitted cleaning and replacement instructions.
Dusty conditions may require additional attention under the applicable service guidance.
Cooling-System Maintenance
On machines with liquid-cooled engines, inspect:
-
Radiator.
-
Screens.
-
Cooling-pack obstruction.
-
Hoses.
-
Clamps.
-
Belts.
-
Visible leakage.
Check any additional oil-cooling equipment identified in the manual.
Never open a pressurised cooling system while hot. Use the correct cleaning method to avoid damaging fins and surrounding components.
Hydraulic Oil and Filters
Hydraulic servicing applies to diesel and electric RT loaders.
Before opening the system:
-
Clean the area.
-
Lower equipment as instructed.
-
Shut down and secure the machine.
-
Follow the prescribed pressure-release procedure.
-
Protect open connections.
-
Keep replacement parts clean.
Use the specified oil and check the level in the correct machine position.
Do not assume that the electric loader’s hydraulics use different servicing principles simply because the pump is driven electrically.
Hydrostatic and Travel-System Maintenance
Follow the requirements for the actual driveline.
Inspect:
-
Relevant filters.
-
Hoses.
-
Seals.
-
Visible leakage.
-
Drive components.
-
Abnormal noise.
-
Temperature-related changes.
Do not apply axle or transmission oil instructions to a machine without confirming which separately lubricated assemblies it has.
Articulation and Oscillation Joints
The centre joint is a major inspection priority.
Check:
-
Excessive movement.
-
Damaged seals.
-
Loose hardware.
-
Abnormal knocking.
-
Lubrication.
-
Hose damage through the joint.
-
Cracks or distortion.
RT machines combine articulation with oscillation, so inspection should account for both steering movement and chassis movement over uneven ground.kuk.kubota-eu+1
Keep clear of the articulation area and use the prescribed locking and support arrangements before relevant repairs.
Steering Maintenance
Inspect accessible components for:
-
Leakage.
-
Damaged hoses.
-
Loose joints.
-
Excessive movement.
-
Uneven response.
-
Abnormal noise.
Do not assume that “articulated steering” means every RT machine has identical cylinders, valves or controls.
Braking and Inching Controls
Follow the model-specific checks for:
-
Service braking.
-
Parking brake.
-
Pedal operation.
-
Warning indicators.
-
Inching function where fitted.
Kubota describes an inching function on RT models that reduces travel drive while allowing hydraulic work. An apparent loss of propulsion therefore needs to account for control operation before a transmission failure is assumed.kubota-eu+1
Do not adjust a brake or linkage to compensate for an unidentified fault.
Tyres and Wheels
Check:
-
Correct tyre specification.
-
Inflation.
-
Sidewall damage.
-
Cuts.
-
Uneven wear.
-
Wheel condition.
-
Fasteners.
Tyre and counterweight configuration can affect the machine’s operating limits. Do not change them without checking the manufacturer’s requirements.
Heavy-equipment tyre work requires suitable equipment and competence.
Loader Linkage and Lubrication
Follow the complete lubrication chart.
Relevant points may include:
-
Loader-arm pivots.
-
Cylinder pivots.
-
Bucket linkage.
-
Articulation joints.
-
Steering joints where specified.
-
Attachment components.
Investigate blocked fittings and joints that do not accept grease.
Lubrication cannot restore worn pins, bushes or mounting bores.
Telescopic Boom Maintenance
On telescopic RT machines, include the prescribed checks for:
-
Boom sections.
-
Wear surfaces and guides.
-
Extension operation.
-
Hydraulic hoses.
-
Retainers.
-
Visible damage.
-
Required lubrication.
-
Load-handling safety equipment.
Do not adjust boom clearances or wear components without the correct procedure.
Telescopic reach changes the working configuration. Use the appropriate load information rather than a headline lifting figure.
Attachment Coupler Maintenance
Inspect:
-
Mounting faces.
-
Locking components.
-
Retainers.
-
Wear.
-
Distortion.
-
Hydraulic leakage where applicable.
-
Attachment fit.
Kubota documents different hitch and locking arrangements across the RT range. Follow the instructions for the coupler actually installed.kuk.kubota-eu+2
Verify engagement before carrying a load.
Electric RT Loader Battery and Charging Maintenance
Inspect the Charging Equipment
Follow the charger and machine instructions.
Check:
-
Cable condition.
-
Connector damage.
-
Contamination.
-
Charging warnings.
-
Signs of overheating.
-
Correct charger identification.
Do not use an unverified charger or improvised adaptor.
Record Charging and Runtime Changes
If runtime falls, record:
-
Battery state of charge.
-
Ambient conditions.
-
Work performed.
-
Attachment use.
-
Selected operating mode.
-
Charging duration.
-
Warning messages.
Shorter runtime does not, by itself, prove the battery needs replacement.
Kubota offers different battery capacities, so runtime comparisons must also account for the installed pack.kuk.kubota-eu+1
Leave Battery-Pack Repairs to Qualified Personnel
A 48 V system can still deliver dangerous electrical current.
Do not open the battery pack, bypass protective devices or improvise repairs to damaged connections. Follow the manufacturer’s isolation and service procedure.
Kubota RT Parts Guide
Filters and Service Kits
Diesel service parts may include:
-
Engine oil filter.
-
Fuel filters.
-
Separator elements.
-
Air-cleaner elements.
-
Hydraulic filters.
-
Belts.
-
Seals.
-
Approved fluids.
Electric machines do not need diesel engine filters, but still require the relevant hydraulic and chassis service items.
Articulation, Steering and Loader Parts
Repairs may require:
-
Pins.
-
Bushes.
-
Bearings.
-
Seals.
-
Shims.
-
Retainers.
-
Steering-cylinder components.
-
Loader-linkage parts.
Measure the entire joint before purchasing individual components.
Drive Components
Identify the installed travel arrangement before buying:
-
Hydraulic wheel motors.
-
Drive shafts.
-
Axle components.
-
Travel motors.
-
Seals.
-
Bearings.
-
Relevant control components.
The documented differences between RT drivelines make model-specific identification essential.kuk.kubota-eu+2
Hydraulic Hoses and Cylinder Parts
Replacement hoses must match application, pressure requirements, fittings, routing and movement allowance.
Order cylinder seal kits against the correct assembly and inspect the rod before deciding that resealing is sufficient.
Pay particular attention to hoses passing through the articulation area or serving telescopic equipment.
Electrical and Charging Components
Confirm the correct application for:
-
Sensors.
-
Switches.
-
Controllers.
-
Contactors.
-
Charging cables.
-
Connectors.
-
Chargers.
-
Battery-related components.
Preserve fault information and establish any setup requirements before replacing parts.
Attachment Parts
Identify the attachment separately when ordering:
-
Fork components.
-
Bucket wear parts.
-
Coupler parts.
-
Hydraulic connections.
-
Grapple components.
-
Powered-tool parts.
Physical connection alone does not establish compatibility. Check weight, hydraulic requirements, clearances and the machine’s operating limits.
Kubota RT Problems and Repairs
The following are diagnostic categories, not defects proven to affect every RT model.
Diesel Engine Will Not Crank
Separate:
-
No electrical power.
-
Indicators present but no starter response.
-
A single click.
-
Repeated clicking.
-
Slow rotation.
-
Intermittent operation.
Check starting conditions and electrical supply using the correct procedure.
Never bridge terminals or bypass safety interlocks.
Diesel Engine Cranks but Will Not Start
Record whether the problem followed:
-
Running out of fuel.
-
Filter replacement.
-
Refuelling.
-
Storage.
-
Cold weather.
-
Electrical work.
Verify the starting and priming procedure before assuming an injection-system failure.
Electric Loader Will Not Enter Ready Mode
Record:
-
Display messages.
-
Battery charge.
-
Charger connection status.
-
Selected controls.
-
Recent charging or electrical work.
-
Whether the fault is intermittent.
Follow the correct enable sequence.
Do not bypass interlocks or attempt a battery-pack repair to force operation.
Machine Will Not Travel
Establish whether:
-
Travel is disabled completely.
-
One direction fails.
-
Movement is weak.
-
The problem occurs only when warm.
-
Loader hydraulics still operate.
-
A warning appears.
Account for parking-brake and inching operation where fitted.
A travel complaint does not automatically establish a failed hydraulic or electric motor.
Hydraulics Are Weak or Slow
Determine whether the fault affects:
-
Lift.
-
Bucket movement.
-
Steering.
-
Auxiliary hydraulics.
-
Several functions together.
-
Operation only when warm.
Check settings, service history and the prescribed test results before major component replacement.
Steering Is Heavy or Uneven
Stop using the machine where steering is unsafe.
Record direction, temperature effects, leakage, warnings and articulation movement.
Do not purchase a steering-cylinder seal kit solely because steering feels different.
Knocking at the Centre Joint
Inspect the articulation and oscillation assemblies using the correct safe method.
Check lubrication, wear, retainers and surrounding structure.
Do not enter the joint area while another person operates the controls.
Loader Arms or Bucket Drift
Lower equipment and keep clear.
The visible movement alone does not identify whether the fault involves a cylinder, valve or another circuit component.
Where load-holding safety equipment is fitted, do not bypass or adjust it as an improvised repair.
Telescopic Boom Will Not Extend Correctly
Record whether movement is absent, weak, uneven or temperature-dependent.
Inspect visible hoses and accessible components safely, then follow the prescribed tests.
Do not force boom movement or change adjustment settings without establishing the cause.
Diesel Engine or Hydraulic Oil Overheats
Stop for a serious warning or visible fluid loss.
After safe cooling, inspect the relevant system.
Record the work performed, attachment use, ambient conditions and time before the warning. Distinguish engine-coolant temperature from hydraulic temperature.
Electric Loader Will Not Charge
Check the approved charging sequence and record charger and machine warnings.
Inspect accessible cables and connectors without dismantling electrical assemblies.
Do not assume the battery is defective before the charger, supply and connection sequence have been assessed.
Hydraulic Attachment Will Not Operate
Determine whether the fault follows the attachment or stays with the loader.
Check:
-
Correct control.
-
Auxiliary circuit.
-
Coupler connection.
-
Flow and pressure requirements.
-
Return arrangement.
-
Electrical connections.
-
Attachment maintenance.
RT machines can have different numbers and types of auxiliary circuits, including mechanical and electro-hydraulic control arrangements.kuk.kubota-eu+1
DPF and Regeneration Warnings
First establish whether the particular diesel machine has a DPF.
Do not treat Stage V compliance alone as proof that every RT engine uses the same aftertreatment arrangement. RT machines use different engine installations, while electric versions have no diesel exhaust system.kuk.kubota-eu+2
Follow the correct warning sequence and investigate repeated warnings rather than repeatedly clearing them.
Hydraulic Leaks
Identify the source safely.
Never use hands to locate a pressurised leak. Follow the shutdown and pressure-release procedure before opening the system.
A suspected hydraulic injection injury requires immediate emergency medical attention.
Safe Kubota RT Repairs
Before maintenance:
-
Park on suitable, level ground.
-
Lower equipment.
-
Shut down the machine.
-
Prevent unintended starting or movement.
-
Follow the prescribed isolation procedure.
-
Release stored pressure correctly.
-
Allow hot components to cool.
-
Use approved supports and articulation locking arrangements.
Never rely on hydraulic pressure alone to support raised equipment.
Electric isolation, major hydraulic testing, articulation repairs, telescopic-boom work and braking repairs require suitable competence, equipment and documentation.
Frequently Asked Questions
Which electric Kubota RT models are verified?
The verified electric models are RT210-2e and RT220-2e. Kubota documents separate electric motors for travel and working hydraulics.kuk.kubota-eu
Which RT models have telescopic booms?
The verified telescopic designations covered here are RT105T-2 and RT305T-2.kuk.kubota-eu+1
Do all RT loaders use individual hydraulic wheel motors?
No. Kubota documents different driveline arrangements across the family, including wheel-motor, shaft-drive and electric configurations.kuk.kubota-eu+2
Can one service schedule cover the entire RT range?
No. Diesel and electric models need different powertrain servicing, and individual chassis, hydraulic and attachment requirements must also be checked.
Are RT210-2 and RT210-2e the same machine?
No. They are separate documented designations, with the “e” model identified as battery-electric. Do not order powertrain components using only the shared numeric portion.kuk.kubota-eu+1
Does a larger published tipping load mean a higher safe lifting capacity in every position?
No. Straight and articulated tipping loads, lifting capacities and load-chart limits describe different conditions. Use the correct information for the actual machine and attachment.kuk.kubota-eu+1