John Deere 955 Serial Number Lookup, PIN Location, Parts & Year Guide
The John Deere 955 is a compact utility tractor from the 55 Compact Series. It was sold primarily in North America and is widely recognised as a four-wheel-drive diesel compact tractor with hydrostatic drive, independent rear and mid PTOs, a Category 1 three-point hitch, and compatibility with mower, loader, backhoe and other work attachments.
A complete John Deere 955 serial number, also called a Product Identification Number or PIN, is essential when ordering parts, selecting the correct manual, confirming a production range, checking attachment fitment or evaluating a used tractor. The model decal alone is not always enough, particularly when a parts catalogue lists early- and late-production components.
And See:
This article covers the North American John Deere 955 compact utility tractor produced during the 1990s. Do not confuse it with the John Deere 955 combine sold in some overseas markets. Combine owners should verify their exact machine type, market and identification number before using tractor parts, serial-number or attachment information.
In this guide
-
Main machine PIN and serial-number plate location
-
Engine serial-number identification
-
PIN format and decoding limits
-
Year identification from serial-number ranges
-
Parts lookup and serial-break checks
-
Maintenance and service implications
-
Attachment compatibility checks
-
Safety, used-machine and missing-plate checks
Quick Guide: Where to Find the Serial Number on a John Deere 955
On the John Deere 955, the main Product Identification Number (PIN) is located on the rear of the tractor, below the rear PTO shaft.
If you are in a hurry:
Park the tractor safely on level ground, stop the engine and remove the key.
Move behind the tractor and inspect the area below the rear PTO shaft.
Look for a plate showing the model and identification information.
Use a torch and gently remove loose dirt with a brush and cloth.
Photograph and record every letter and number before ordering parts or discussing the tractor with a dealer.
Main Product Identification Number (PIN) Location on the John Deere 955
Exact position on the tractor
The John Deere 955 serial-number plate is positioned at the rear of the tractor below the rear PTO shaft. This is the primary machine identification point for the compact utility tractor itself.
The rear location can become difficult to inspect because the area is exposed to dust, mud, grease, mower-deck debris, three-point-hitch implements and normal wear around the drawbar and PTO. An attachment may also limit access or make the plate harder to photograph.
Do not confuse the machine PIN with numbers found on an attachment, mower deck, loader, backhoe, engine, hydraulic component or axle housing. Those numbers identify individual components or equipment and may not match the tractor’s main Product Identification Number.
What the identification plate shows
The identification plate provides the tractor model and the machine’s identifying number. Record the full number exactly as it appears, including letters, leading zeroes and any prefixes.
A complete number matters because parts catalogues and dealer systems can use the entire PIN or serial sequence to identify the correct production range. A single incorrect character can place the tractor in the wrong range and lead to an incorrect part order.
Age, corrosion, paint overspray, dirt, sun exposure and physical damage can make an original plate difficult to read. Clean only enough to reveal the marking without damaging the plate or its surface.
Tips for old, dirty or painted tractors
-
Brush away loose soil, chaff and grease before trying to read the plate.
-
Use a clean cloth and a mild degreaser where appropriate.
-
Avoid harsh solvents if the plate has printed or painted information.
-
Photograph the plate before and after cleaning.
-
Use side lighting from a torch to make shallow or faded characters easier to see.
-
Record the complete number exactly, including leading zeroes.
-
Do not use grinders, wire wheels, aggressive abrasives or scraping tools that could damage the identification plate.
-
Do not restamp, alter, fabricate or install a replacement identification plate yourself.
A missing, damaged or suspicious identification plate should be treated as an identity issue, not a cosmetic repair. Contact a John Deere dealer and, where theft, registration or ownership is relevant, the appropriate local authority.
Engine Serial Number on the John Deere 955
The machine PIN identifies the tractor. The engine serial number identifies the engine fitted to it. Both may be required when ordering parts, particularly for engine overhaul work, fuel-system parts, cooling-system components, electrical items and engine-specific maintenance parts.
The John Deere 955 compact utility tractor uses a Yanmar three-cylinder diesel engine. The engine identification number is separate from the tractor PIN and should not be expected to match it character for character.
Engine serial-number location
The exact engine-number position should be confirmed against the correct John Deere technical information or the applicable Yanmar engine documentation for the engine installed in the tractor. Engine identification is normally found on an engine-mounted label or stamped area, but access and position can vary with the engine version and production range.
Inspect the engine only with the tractor parked securely, engine stopped, key removed and components cool enough to handle safely. If the engine number is obscured by dirt or a side panel, clean the area carefully rather than removing or damaging labels.
Why the engine number matters
Use the engine model and engine serial number when checking:
-
Internal engine overhaul parts
-
Fuel-system components
-
Injection-system parts
-
Cooling-system parts
-
Starter, alternator and electrical components
-
Belts and engine-mounted accessories
-
Engine-specific technical procedures
A replacement engine, rebuilt engine or major engine repair can mean that the engine serial number no longer corresponds to the original tractor build information. That does not automatically indicate a problem, but it should be documented when buying or selling the tractor.
How to Read a John Deere 955 Serial Number
Copy the complete John Deere 955 PIN exactly before attempting a lookup. Do not rely on a partial number, a number remembered from a previous owner or a sequence copied from a sales listing.
A machine PIN can help a dealer identify the individual tractor, applicable parts range and relevant production information. However, individual character meanings should not be guessed from generic online PIN-decoding charts, especially on older compact tractors.
PIN structure
John Deere’s publicly available documentation does not clearly confirm one complete character-by-character decoding system for every John Deere 955 production version. Some character meanings may be internal to John Deere dealer and parts systems.
[MODEL CODE]-[PRODUCTION CODE]-[SEQUENCE NUMBER]Illustrative format only — this is not a real John Deere 955 serial number and should not be used to identify a machine.
What the PIN can tell you
A complete and correctly recorded John Deere 955 PIN can help with:
-
Identifying the individual tractor
-
Selecting the appropriate parts-catalogue production range
-
Helping a John Deere dealer identify build and configuration information
-
Matching the correct operator’s and technical-manual coverage
-
Checking for machine-specific safety or service actions
-
Supporting attachment-fitment checks
-
Verifying whether paperwork appears to match the tractor
What the PIN cannot tell you on its own
A John Deere 955 serial number does not independently prove:
-
The exact calendar year without a verified serial-range reference or dealer lookup
-
The full original equipment specification
-
The original selling dealer
-
Complete service history
-
Current legal ownership
-
Whether major components have been replaced
-
Whether the tractor has been stolen
-
Whether finance is outstanding
Use the PIN as one part of a wider identification and condition check.
Finding the Year of Your John Deere 955 from the Serial Number
Verified serial-number starting points are available for the North American John Deere 955 compact utility tractor. These figures identify the starting serial number for each listed production year and should be used as production-year guidance rather than as proof of a registration date, sale date or model-year designation.
These numbers should be read carefully. A starting number marks the beginning of a production-year range, not necessarily the exact date that an individual tractor was assembled, delivered or first sold.
How to identify the year carefully
-
Copy the full PIN exactly from the plate below the rear PTO shaft.
-
Compare the serial sequence with a verified John Deere 955 production-year range.
-
Check whether the machine is a North American 955 compact utility tractor rather than another John Deere product using the 955 designation.
-
Ask a John Deere dealer to search the complete PIN for the applicable production information.
-
Compare the result with original sales paperwork, service records, decals, manuals and machine configuration.
-
Treat generic online serial-year charts with caution unless they clearly identify the John Deere 955 compact tractor and the correct market.
A dealer PIN lookup remains the best option when the number sits close to a production transition, the plate is partly unreadable or the tractor has unusual equipment.
Using Your John Deere 955 Serial Number to Order the Right Parts
The John Deere 955 model designation is a useful starting point, but it is not always enough to order the correct part. The tractor’s production range, engine identification, drivetrain configuration and installed attachment can all affect the part required.
This is especially important on an older compact tractor that may have received repairs, updates, replacement hoses, aftermarket filters, rebuilt engines or attachment changes during its working life.
Understanding serial breaks
A serial break is a point in production where John Deere changed a part, system, specification or design. Parts catalogues use serial breaks to separate early and late machines that may look similar but require different components.
Common catalogue wording includes:
-
Serial number below: Use the listed part only for tractors with a lower serial number.
-
Serial number and above: Use the listed part from the stated serial point onward.
-
Before PIN: Applies before the specified identification number.
-
After PIN: Applies after the specified identification number.
-
Early production: Applies to the earlier version of the tractor or component.
-
Late production: Applies to the later version.
-
With or without option: Parts depend on installed equipment, not simply the tractor model.
Known serial breaks on the John Deere 955
Publicly available information does not provide a complete, reliable serial-break table for every John Deere 955 component. Owners should still read every serial-range and option note in the official parts catalogue because changes can exist even when a public serial-break chart is unavailable.
Pay particular attention to notes affecting engine parts, hydraulic hoses, electrical components, steering parts, front-wheel-drive components, mower-drive parts, loader brackets and three-point-hitch equipment.
Ordering parts correctly
-
Photograph and record the complete machine PIN.
-
Confirm that the identification plate states John Deere 955.
-
Record the engine model and engine serial number for engine-related parts.
-
Use the official John Deere parts catalogue wherever possible.
-
Read every “before,” “after,” “serial number below” and “serial number and above” note.
-
Compare the old part and visible component with the catalogue illustration.
-
Confirm attachment model and attachment identification number before ordering mower, loader or backhoe parts.
-
Ask a John Deere dealer or knowledgeable supplier to confirm uncertain parts before placing an order.
Aftermarket catalogues sometimes group multiple John Deere 955 production versions under one model heading. Do not assume that a listed item fits solely because the title says “for John Deere 955.”
Maintenance and Service Differences by Serial Range
The John Deere 955 operator’s information includes scheduled service requirements for the tractor, including daily or 10-hour checks, regular service intervals, 200-hour service, 500-hour service and longer-term maintenance. However, the correct procedure, specification and service part should always match the tractor’s actual PIN range and engine identification.
The 955 has separate service needs for its diesel engine, hydrostatic transmission and hydraulic system, front-wheel-drive axle, cooling system, fuel system, PTO and three-point-hitch components. A machine fitted with a mower deck, front-end loader, backhoe or other attachment also needs attachment-specific maintenance.
Use the correct documentation
Use the operator’s manual and parts information that matches the tractor’s exact PIN range. Confirm engine-related items using both the machine PIN and engine serial number.
The most important items to verify before ordering include:
-
Engine oil and filter
-
Fuel-system service parts
-
Air-cleaner elements
-
Hydraulic and transmission filter components
-
Front-wheel-drive axle service requirements
-
Cooling-system service items
-
Belts and electrical components
-
Mower-deck drive parts
-
Loader, backhoe and hydraulic-hose parts
Do not assume that capacities, lubricants, filters or service procedures are identical across every 955 production range or every tractor that has been modified during its service life.
Attachment Compatibility for the John Deere 955 by Serial Number
The John Deere 955 was designed as a versatile compact utility tractor and could be equipped for mowing, material handling, digging and three-point-hitch work. Factory-supported equipment associated with the 955 includes mid-mount mower decks, a front blade, front-end loader and backhoe applications.
Fitment must be confirmed before purchase because attachment compatibility depends on more than the tractor decal. Mounting hardware, hydraulic configuration, PTO arrangement, lift linkage, tyre size, ballast, serial range and attachment version can all matter.
Attachment checks
Do not assume a mower deck, loader, backhoe or blade from another John Deere compact tractor will fit a 955. Similar tractors can use different frames, brackets, driveline parts, hydraulic connections and attachment hardware.
Before buying a used attachment, provide the complete tractor PIN and the attachment identification number to a John Deere dealer. This is the safest way to confirm physical fitment, required hardware and parts support.
Checking Recalls and Safety Notices Using Your John Deere 955 PIN
Safety recalls, campaigns and service actions can apply only to specific machine PIN ranges, installed components or configurations. The presence of a John Deere 955 model decal does not confirm whether a particular action applies to a particular tractor.
Use the complete PIN when checking safety information.
-
Record the full tractor PIN from the plate below the rear PTO shaft.
-
Contact a John Deere dealer and request a check for open safety campaigns or recall actions.
-
Check official John Deere safety or recall information for the market in which the tractor was sold or is now used.
-
Keep a photograph and written record of the PIN with ownership, insurance and service documents.
-
Record the identification numbers of major attachments where they are relevant to the check.
Using the John Deere 955 Serial Number When Buying or Selling
A correctly identified tractor is easier to value, service, insure and sell. The PIN should be one of the first things a buyer checks and one of the most useful details a seller records privately.
Checks for buyers
-
Check that the PIN plate below the rear PTO shaft matches available paperwork.
-
Confirm the tractor is a John Deere 955 compact utility tractor, not another John Deere machine using the 955 designation.
-
Look for damage, removal marks, unusual rivets, altered characters, mismatched paint or obvious plate replacement.
-
Verify that the seller is not using an engine, mower-deck, loader or backhoe number as the tractor serial number.
-
Use the PIN to check parts ranges, possible attachment fitment and applicable safety actions.
-
Compare the tractor’s condition, hour meter, wear points and service history with the seller’s description.
-
Be cautious if the seller cannot explain missing, unreadable or inconsistent identification information.
-
Pause the purchase if there is a serious identity discrepancy.
Advice for sellers
A clear, honest listing should identify the tractor as a John Deere 955, state its hours as displayed, describe installed attachments and summarise known service history. Include useful overall photographs and close-up images of major components, but avoid publishing a high-resolution image of the complete PIN plate.
Share the full PIN privately with a serious buyer, John Deere dealer, insurer, finance provider or parts supplier when appropriate. Retain a dated record of the number and the sale documents after the tractor changes hands.
What If You Cannot Find or Read the Serial Number?
Plate is dirty, painted over or faded
Start with good lighting, a soft brush and a cloth. Remove loose debris and surface grime carefully, then photograph the plate from several angles. Side lighting often reveals characters that are difficult to read under direct light.
Avoid abrasive cleaning, sanding, grinding or aggressive scraping. The objective is to preserve the original identification information, not make it look new.
Plate is corroded or damaged
Record every character that remains readable. Keep clear photographs and compare the visible sequence with original paperwork, service records and dealer records.
A John Deere dealer may be able to assist with a partial-number investigation when enough original information remains. Do not guess missing digits or letters when ordering parts or describing the tractor for sale.
Plate is missing
Check for legitimate supporting information in original owner documents, dealer service invoices, insurance records and historical parts orders. The tractor may also have component identification numbers, but these do not automatically replace the machine PIN.
Do not manufacture, restamp, alter or fit a replacement identification plate yourself. Contact a John Deere dealer and, if ownership, theft or registration is relevant, the appropriate authority.
PIN does not match paperwork
A mismatch can result from a data-entry error, incorrect paperwork, a number copied from an engine or attachment, a replacement component or a more serious ownership issue.
Resolve the discrepancy before buying, selling, financing, insuring or registering the tractor. A John Deere dealer can help confirm the correct machine information, while the appropriate authority should be involved if theft or title concerns arise.
John Deere 955 Serial Number FAQ
Where is the serial number on a John Deere 955?
On the North American John Deere 955 compact utility tractor, the main serial-number or Product Identification Number plate is located at the rear of the tractor below the rear PTO shaft. Park safely, stop the engine, remove the key and inspect the area with a torch. Clean loose dirt gently before attempting to read the complete number.
What does the serial number on my John Deere 955 identify?
The serial number identifies the individual John Deere 955 tractor. It helps dealers, parts suppliers and owners distinguish one production-range machine from another and select suitable parts, manuals and service information. It can also support checks of attachment fitment, safety actions and paperwork consistency, but it does not independently prove ownership or full service history.
Is the John Deere 955 serial number the same as a VIN?
The tractor’s Product Identification Number serves a similar identification purpose to a vehicle VIN, but agricultural equipment should not be assumed to use the same standards, decoding rules or registration systems as road vehicles. Use the full John Deere 955 PIN when discussing the tractor with a dealer, insurer, parts supplier or authority.
Is the Product Identification Number the same as the serial number?
For practical ownership and parts-lookup purposes, the Product Identification Number is the main serial identification for the John Deere 955 tractor. John Deere documentation and owners may use PIN, product identification number, product ID and serial number in related ways. Record the complete marking exactly as shown on the tractor identification plate.
Can I find the year of my John Deere 955 from the serial number?
Yes, verified production-year starting serial numbers are available for the North American 955 compact utility tractor. However, they indicate production ranges rather than exact assembly or sale dates. Compare the full number carefully, then ask a John Deere dealer to confirm the production information if the tractor is near a transition point or the plate is difficult to read.
Are official serial-number year charts available for the John Deere 955?
Serial-number production guidance exists for the North American John Deere 955 compact utility tractor, but a dealer PIN lookup is the strongest way to confirm the applicable production information. Use the full machine PIN rather than relying on a partial sequence, a seller’s claimed year or a generic John Deere serial-number chart that may apply to another model.
How accurate are online John Deere 955 serial-number year charts?
An accurate chart must specifically identify the John Deere 955 compact utility tractor and the correct market. Generic John Deere charts can be misleading because the company has used many different number systems across tractors, lawn equipment, construction equipment and combines. Treat online charts as a cross-check, then confirm important buying or parts decisions with a dealer PIN lookup.
What is the difference between the machine PIN and engine serial number?
The machine PIN identifies the John Deere 955 tractor as a whole. The engine serial number identifies the Yanmar diesel engine fitted to it. Use the machine PIN for tractor parts, production-range checks and machine identity. Use the engine model and engine number for engine-specific parts, overhaul work and engine technical procedures.
Where is the engine serial number on a John Deere 955?
The engine number is separate from the rear-mounted tractor PIN. Its exact position should be confirmed using the correct John Deere technical information or applicable Yanmar engine documentation for the installed engine. Look for an engine-mounted identification point only after stopping the engine, removing the key and allowing hot components to cool.
Do I need the engine number or the machine PIN to order parts?
Use the machine PIN for tractor chassis, transmission, hydraulic, steering, electrical and attachment-related parts. Use the engine model and engine serial number for engine-specific components such as internal engine parts, fuel-system components, cooling parts and certain electrical items. For uncertain orders, provide both numbers to the supplier or John Deere dealer.
Why does the parts catalogue ask for a serial-number range?
A serial-number range separates early and late production versions where John Deere changed a component, system or design. The catalogue may list different parts before or after a stated serial break. Check every serial-range note rather than assuming that all parts listed for a John Deere 955 fit every tractor carrying the 955 decal.
What is a serial break on a John Deere 955?
A serial break is the point at which production changed from one version of a component or system to another. It may affect a hose, linkage, switch, electrical component, hydraulic part, engine-related item or attachment hardware. The serial break helps ensure that the selected part matches the tractor’s original production range.
Which John Deere 955 parts are most likely to change by serial range?
Parts catalogues should be checked carefully for engine-related items, hydraulic parts, electrical components, steering and front-wheel-drive parts, mower-drive components and attachment mounting hardware. A previous repair can also introduce a later or aftermarket component. Always compare the tractor PIN, the old part and the official diagram before ordering.
Does maintenance differ by serial number on a John Deere 955?
Basic maintenance responsibilities remain similar, but service parts, specifications and procedures can vary by production range, engine version or installed equipment. Use the operator’s manual and parts information that match the tractor’s PIN. Confirm engine-specific service parts with the engine model and serial number, particularly when the machine’s history is uncertain.
Can filters change by serial number or engine version?
Yes. A filter or service component can depend on the tractor’s production range, the specific engine version or a previous update. Do not order filters solely from a generic online listing. Check the machine PIN, engine identification and official parts information, then compare the existing component where practical.
How do I use a John Deere parts catalogue with my 955 PIN?
Start by selecting the correct John Deere 955 compact utility tractor catalogue. Enter or compare the full machine PIN where the catalogue provides serial-range choices. Read every note that says “before,” “after,” “serial number below,” “serial number and above,” or “with option.” For engine parts, identify the engine model and serial number separately.
Can a John Deere dealer identify build details from the PIN?
A John Deere dealer can use the complete PIN to check applicable dealer-system information, parts ranges and machine details. The level of information available can vary with the tractor’s age, market and record coverage. Give the dealer the full number exactly as it appears on the plate below the rear PTO shaft.
Can I check recalls or safety notices using my John Deere 955 PIN?
Yes. Record the full PIN and ask a John Deere dealer to check for open safety campaigns or recall actions applicable to that tractor. Safety actions can depend on serial range, machine configuration or installed components. Keep the PIN with ownership records so future checks are straightforward.
Is it safe to share a John Deere 955 serial number online?
Use caution. A partial number can be useful in a public discussion, but avoid posting a high-resolution photograph of the entire identification plate in a public sale listing or forum post. Share the complete PIN privately with serious buyers, dealers, insurers and parts suppliers when there is a legitimate reason to do so.
What should I do if the serial plate is missing?
Do not make or install a replacement identification plate yourself. Gather original documents, service invoices, dealer records and photographs of legitimate identifying features, then contact a John Deere dealer. If ownership, theft, registration or title concerns exist, contact the appropriate local authority before buying, selling or registering the tractor.
How can I tell whether a serial plate has been tampered with?
Warning signs can include altered characters, disturbed fasteners, unusual rivets, mismatched paint around the plate, fresh grinding marks, a plate that does not match paperwork or a number inconsistent with the machine’s model. These signs do not prove wrongdoing on their own, but they justify further checks before a transaction.
Can I legally replace a damaged identification plate?
Do not assume that a replacement is permitted simply because the original plate is damaged. Identification-plate rules can involve manufacturer policy, ownership documentation and local law. Contact a John Deere dealer and, where necessary, the relevant authority. Never restamp, alter or create an identification number.
Why does the serial number not match my paperwork?
Possible causes include a transcription error, paperwork for another machine, an engine or attachment number mistakenly recorded as the tractor PIN, a replacement component or a more serious identity issue. Compare the documents against the rear tractor PIN, then resolve discrepancies with a John Deere dealer before completing a sale or registration.
Do attachments for a John Deere 955 depend on serial number?
They can. Attachment fitment can depend on the tractor PIN range, mounting hardware, hydraulic equipment, PTO arrangement, tyre size, ballast and the attachment’s own model and identification number. This is particularly important for mower decks, loaders, backhoes and front-mounted equipment. Confirm fitment before spending money on a used attachment.
Which loaders, backhoes, decks or snowblowers fit a John Deere 955?
The 955 was offered with mower-deck, loader, backhoe and front-blade applications, but exact compatibility should be confirmed using both the tractor PIN and the attachment identification number. Do not assume equipment from another John Deere compact tractor fits. A dealer can confirm mounting requirements, hydraulic needs and required ballast.
Will an attachment from another John Deere model fit my tractor?
Not necessarily. Similar compact tractors can use different mounting frames, lift hardware, driveshafts, hydraulic couplers, electrical connections and safety requirements. Even if an attachment physically appears to fit, it may not operate safely or correctly. Confirm the tractor PIN, attachment model and attachment serial number before purchase.
Can I decode every character in my John Deere 955 serial number?
Do not assume that every character can be decoded using a generic online chart. Older John Deere compact tractors may use identification formats that differ from modern 17-character PIN systems. Use the full number to obtain confirmed information from a John Deere dealer or the correct model-specific documentation.
Does the serial number show where my John Deere 955 was built?
The PIN may help John Deere identify production information through dealer systems, but owners should not guess factory or country details from individual characters without model-specific confirmation. The John Deere 955 compact utility tractor was associated with production in the United States, but the complete PIN remains the correct starting point for confirming an individual tractor.
How should I record and store my John Deere 955 PIN?
Photograph the plate clearly, write the PIN down exactly and store the record with the operator’s manual, service invoices, insurance paperwork and purchase documents. Keep a separate copy in a secure digital location. Also record the engine serial number and the identification numbers of major attachments such as a loader, backhoe or mower deck.
Can I still get parts for an early John Deere 955?
Availability depends on the individual part, production range and whether a current replacement has superseded the original item. Begin with the complete machine PIN and consult the official John Deere parts catalogue or a dealer. Used and aftermarket options may exist, but verify fitment carefully and do not substitute parts without confirming compatibility.
How can I identify my machine if the John Deere 955 decals are missing?
Start with the rear Product Identification Number plate below the PTO shaft. The plate is more reliable than decals because decals can fade, be replaced or be lost during repainting. Compare the model information with the tractor’s physical configuration, operator controls and original documentation, then ask a John Deere dealer to confirm the PIN.
Does the serial number affect resale value?
The PIN does not create value by itself, but a clear, original and matching identification number can increase buyer confidence. It helps buyers verify the tractor’s production range, order parts, assess attachment compatibility and check safety actions. Missing or inconsistent identification information can reduce buyer confidence and complicate a sale.
Are there known serial-number-related service bulletins for the John Deere 955?
Service information can be tied to serial ranges, components or configurations. Ask a John Deere dealer to check the full PIN for applicable service information and open safety actions. Avoid relying on unverified claims from listings, forums or generic tractor discussions, particularly when ordering safety-related or hydraulic components.
Who should I contact if I am still unsure about my John Deere 955 serial number?
Contact a John Deere dealer with clear photographs of the tractor, the rear identification plate, the engine identification point and any relevant attachment tags. Provide the complete PIN exactly as recorded. For ownership, theft, registration or legal identity concerns, also contact the appropriate local authority before buying, selling or registering the machine.